TL866A - need to program 25Q21BT but device not on list

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • dicky96
    Sun Seeker
    • Mar 2017
    • 1825
    • Spain

    #1

    TL866A - need to program 25Q21BT but device not on list

    Hi guys
    This is the first time my TL866CS let me down (other than 1.8V eproms for which I ordered CH341 but it did not arrive yet)

    I want to program a 25Q21BT Eprom but it is not found on the list in minipro

    I can see GD25VQ21B but when I try to read my chip, the ID does not match
    0x C8 40 12

    My App is version 6.85 and programmer 03.2.86

    Is there a software update to program this eprom. The datasheet says it is 3.3V (if this is the right one)

    https://pdf1.alldatasheet.com/datash...M/GD25Q21.html

    The Eprom is of a Gigabyte GTX 980 ti 6Gb DDr5
    Follow me on YouTube
    ------------------
    Learn Electronics Repair
    https://www.youtube.com/channel/UCFX...R8UZ2vg/videos
  • dicky96
    Sun Seeker
    • Mar 2017
    • 1825
    • Spain

    #2
    Re: TL866A - need to program 25Q21BT but device not on list

    Hmmm no replies, but I did a google for 'CH341A supported eprom list' as I also have one of these programmers arriving soon, and the 25Q21 doesn't seem to be supported by that programmer either

    I think the full part number is GD25Q21B - it does have a funny G logo marked on it.

    Is there something odd about this eprom? CH341A is supposed to support 25 series eproms
    Follow me on YouTube
    ------------------
    Learn Electronics Repair
    https://www.youtube.com/channel/UCFX...R8UZ2vg/videos

    Comment

    • lotas
      Badcaps Legend
      • Jan 2016
      • 4456
      • Russia

      #3
      Re: TL866A - need to program 25Q21BT but device not on list

      Try to replace it with W25X20CLSNIG, they write on the forums that it is an analogue of it.
      Or try to set on the programmer: W25X20CL.
      Last edited by lotas; 02-23-2022, 01:58 PM.

      Comment

      • dicky96
        Sun Seeker
        • Mar 2017
        • 1825
        • Spain

        #4
        Re: TL866A - need to program 25Q21BT but device not on list

        OK I'll give that a go tomorrow

        Thanks
        Follow me on YouTube
        ------------------
        Learn Electronics Repair
        https://www.youtube.com/channel/UCFX...R8UZ2vg/videos

        Comment

        • megaraider
          Badcaps Veteran
          • Jul 2015
          • 307
          • Portugal

          #5
          Re: TL866A - need to program 25Q21BT but device not on list

          Originally posted by dicky96
          I want to program a 25Q21BT Eprom but it is not found on the list in minipro
          I can see GD25VQ21B but when I try to read my chip, the ID does not match
          0x C8 40 12
          I think the full part number is GD25Q21B - it does have a funny G logo marked on it.
          That 'G' logo stands for 'GigaDevice'
          The ID code: 0xC84012 is match for 'GD25Q21B'
          Datasheet may be found here: https://cdn.badcaps-static.com/pdfs/...a99e3d6bea.pdf
          btw, 'ELM Technology' [http://www.elm-tech.com] also produces it.

          Originally posted by dicky96
          The Eprom is of a Gigabyte GTX 980 ti 6Gb DDr5
          Compare to dumps available on the internet.
          Last edited by megaraider; 02-23-2022, 04:41 PM. Reason: Added more info

          Comment

          • dicky96
            Sun Seeker
            • Mar 2017
            • 1825
            • Spain

            #6
            Re: TL866A - need to program 25Q21BT but device not on list

            @megaraider
            I do have that ID code 0xC84012, as I stated in the OP

            The problem is that my programmer does not seem to list support for this IC, but the fact there are bios dumps on the internet suggests that some programmer or other must in fact support it

            I will try using W25X20CL as lotas suggest -it certainly seems to read the eprom if I tell it to ignore the ID check
            Follow me on YouTube
            ------------------
            Learn Electronics Repair
            https://www.youtube.com/channel/UCFX...R8UZ2vg/videos

            Comment

            • stj
              Great Sage 齊天大聖
              • Dec 2009
              • 30911
              • Albion

              #7
              Re: TL866A - need to program 25Q21BT but device not on list

              maybe the replacement sofware has more devices?
              https://gitlab.com/DavidGriffith/minipro/

              Comment

              • megaraider
                Badcaps Veteran
                • Jul 2015
                • 307
                • Portugal

                #8
                Re: TL866A - need to program 25Q21BT but device not on list

                Originally posted by dicky96
                I will try using W25X20CL as lotas suggest -it certainly seems to read the eprom if I tell it to ignore the ID check
                When compared the only difference seems to be that GD25Q21B is able to do Quad SPI, which isn't relevant when programming. Other details as programmable page size (256-bytes), Sector/Block size, and of course 2M-bit size do match. So imo go ahead...!

                Originally posted by stj
                maybe the replacement software has more devices?
                https://gitlab.com/DavidGriffith/minipro/
                Checked, might have for other ICs, but doesn't support GD25Q21B either (not even any 'GigaDevice' ICs).

                Side Note:
                Thanks to the moderator for deleting my previous empty reply. I must be blind because i couldn't find the option to delete (only edit, within a time frame) or it doesn't exists

                Comment

                • jehardyiii
                  New Member
                  • Mar 2022
                  • 1
                  • United States

                  #9
                  Re: TL866A - need to program 25Q21BT but device not on list

                  I have this exact same issue. I also tried the WL analog but didn't have luck. Did you figure it out?

                  Comment

                  Related Topics

                  Collapse

                  • darklori
                    "How to program EPROM W25R128JWSIQ"
                    by darklori
                    Hello, a pleasure to join the community!

                    I have tried to program this EPROM from a laptop, the W25R128JWSIQ.

                    I tried using the CH341A, but it does not have support for this chip. Is there any programmer that can detect it so I can burn the bin file?

                    01-11-2025, 02:53 AM
                  • Mark D
                    Samsung UN65JU67ODFXZA Version TD01 Schematic and Parts List
                    by Mark D
                    The TV is a Samsung UN65JU67ODFXZA Version TD01. I replaced the power source board and the TV is now working, but I decided to try and troubleshoot the old board to fix at the component level. Trying to get a schematic and a parts list has proven to be an issue. Trying on my own, I can't tell you how many times my Norton security has flagged sites as "malicious". I ordered a service manual from ServiceManuals.net, paid $16.99 and got 66 pages of everything BUT schematics and component parts list! Can anyone steer me in the right direction? Some of the surface mounted component parts...
                    10-29-2024, 03:15 PM
                  • Deby
                    List of compatible laptop motherboards
                    by Deby

                    This is a list of compatible laptop motherboard information that I have been collecting for some time.
                    And it's still ongoing.
                    Every time I come across information that a board is compatible with another, I write it down.
                    Anyone who wants to, can continue to expand the list.
                    Packed in the rar, is an excel table that has additional information.
                    Motherboards.rar...
                    05-31-2024, 04:34 AM
                  • Nikan.e
                    How to program a specific flash region of a Nations N32G455RE MCU?
                    by Nikan.e
                    Greetings and salutations!

                    I have a device that uses an N32G455RE. Unfortunately, its flash got corrupted. I have a dump of a working chip.
                    How can I program a specific region of the flash or the whole flash without touching the RAM, option registers, etc.?
                    I do not have a J-Link debugger and won't buy one, as I am not rich.
                    I have flashed a Nucleo board with an ST-Link to a J-Link just to find out that the ST-J-Link only supports ST chips.

                    What would be the cheapest and easiest option to program the Nations chip's flash without touching registers etc.?...
                    05-23-2024, 11:51 PM
                  • dicky96
                    CH341 Programmer - any good for 1.8V?
                    by dicky96
                    Hi guys
                    I have a TL866 CS Eprom programmer and up until now it did everything I needed to do

                    However for the first time I have come across a 1.8V Eprom and my programmer will not do 1.8V

                    I need to program a 25Q64FWTG

                    I could splash the cash and buy a V11.71 TL866II. These come with various attachments and the kit including a 1.8V adapter is either €62 with 12 adapters or €68 with 1 7adapters. I also have the option to buy just the programmer for €46.70, if I could get the 1.8V adapter separately and use the other eprom adapters from...
                    01-31-2022, 06:14 AM
                  • Loading...
                  • No more items.
                  Working...