Announcement

Collapse

Forum Rules *ALL NEW MEMBERS, PLEASE READ!! UPDATED!!*

First and foremost, Welcome to the Badcaps Capacitor Search Engine & Forums!

New members that have activated their accounts have limited access to certain features of the site until established. Members with zero posts have no access to the private messaging system. Also, members with zero posts may not edit certain profile attributes, such as signatures. New members also may not create new threads. However, new members with zero posts have full access to all technical information contained on this forum, and that also includes attachments (images and files that other members have uploaded), and new members that have activated their accounts are free to post replies to existing threads. If you wish to create a new thread, the fix is simple! All you need is ONE post to be able to have full unrestricted access, and that can be simply posting an introduction of yourself or say hello in THIS THREAD. This may seem a little strange, but it helps keep spam and abuse curved. Please note, that it may take up to one hour from your first post for the limits to be removed. If you make a post and don't immediately see the restrictions gone, be patient. The promotion system updates every hour.

Please complete your profile after making your first post, with your name, locale, and other info. It's nice to know members on a first name basis, and know where they're from. Makes for a much friendlier environment!

Posting rules for this forum will be STRICTLY enforced by myself as the owner/administrator, and my moderator crew.

Badcaps.net IS A BUSINESS!!! If you are a servicer, service center, or vendor of any kind in the computer/capacitor industry, you are NOT permitted to advertise, link, promote, or plug your business on this forum in ANY way! NO EXCEPTIONS!! This includes asking for "donations" in exchange for BIOS passwords or tech advice for anything! If I see you doing that, your post will be edited or deleted, and you warned. If it happens again, you will be banned. The only exceptions are the references to the companies quoted in the FAQ which the administration have added for the convenience of those around the world who have difficulty to source caps for their repair.

This also includes using this forum's private message system to solicit business. Members, if you receive a PM from anyone offering repair services or components, please alert me immediately! Myself or any of my moderators, will never private message a user soliciting business, for Badcaps.net, or any other servicer/vendor. If you PM me about repairing your device, I will reply and take care of you, however, I will not message you first.

------------------------------------

Posting rules:

This forum was created to be a technical support forum primarily for the do-it-yourselfers who choose to repair their own boards. Any and all technical questions are welcome!

1) Please use the SEARCH feature!! Your question may have been answered in another thread! Please search first and see if it has!

2) When posting a technical question, be as detailed as possible in your thread. The more information we have about your specific problem, the better we can answer your question.

3) Please use COMPLETE sentences, punctuation, and grammar! Nobody is perfect, hence, a spelling error on occasion is no biggie. However, posts/threads that are unreadable will be deleted. This includes any and all forms of 'ebonics', leet, chatroom jargon, and 'text message' shorthand and slang. This forum is not a chatroom/text message, please use full words and complete sentences.

4) Keep discussion on topic!! DO NOT HIJACK THREADS! It's easy to do (I've done it myself a few times...) Lets try to keep it down to a minimal!! If you have something really off topic, that's what the lounge is for!

5) Keep things civil! There will be no tolerance for flaming, bashing, hateful remarks, racial remarks, adult material of ANY kind, and so on.

6) THE LOUNGE RULES! The lounge is a place for off topic chit-chat! If you post something that might be considered questionable or something you don't want kids to see, or something you can't view at work/school, etc, please label that thread *NWS* or NOT WORK SAFE in the thread title as a warning. The Lounge is NOT moderated, anything is welcome... Feel free to post rants, jokes, cars, hot women (remember the NWS warning in the title), or just about anything within reason. It's an open forum! Please refrain from participating in political topics if you have thin skin, they can get heated sometimes!! Remember that we have members here from all over the world, with many different views and cultures. Political debates can turn really ugly, and really fast, and if they degrade to personal attacks and useless banter/bashing, moderator action will ensue. I want this forum to be a safe haven for technical discussions from all walks of life, so lets keep off topic discussions civil and friendly.

7) Spamming and spammers will NOT be tolerated or accepted in any way, shape, or form! Spam bots are instantly and permanently banned, and their threads deleted! The mod crew is really quick to zap spammers, we typically pop them before they even get to post. This also includes regular members as well. be courteous and not post spam. This includes links to off-site information that's not relevant to the thread at hand. Do not plug other websites, forums, or businesses in your signatures. You may do so in a thread if the off-site link you're posting is relevant to the topic, but otherwise, don't do it. If you see a thread which clearly a spam bot posting that we have not removed yet, DO NOT click any links in it!! Simply click the 'report bad post' button, and it'll be taken care of, usually within minutes.

8) Account removals & closures: Since no personal information is given in the creation of your Badcaps.net Forum account, requests to remove and/or delete accounts will be declined. Any requests for removal of threads & posts you created will also be declined. The reason is the missing posts can/will leave threads incomplete and fragmented. For the threads to be of help to others later on, information can't and won't be missing. However, if you inadvertently posted personal identifiable information in a post (such as an email address, real name, or phone number), please contact a staff member. In those cases, the post may be edited or removed, at the staff members discretion.

That's about it for the rules, the setup here is pretty loose. However, if you're caught violating any of the rules above, here's what will happen:

First offense: Warning by me or a moderator
Second offense: Banning for 1 day
Third offense: Banning for 3 days
Fourth offense: Banned permanently.

If you do something really dumb, or are just a troll, I will skip the warning and the temporary banning, and ban you permanently!

The rules are pretty cut and dry... However, if you have any questions about this policy, feel free to contact me.
See more
See less

Recommendations of quality soldering station and (separate) hot air station

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Recommendations of quality soldering station and (separate) hot air station

    Hey,

    I'm looking for some recommendations of a decent quality soldering station and a separate hot air station. I'm just a hobbyist, so even if (ultra)premium tools are not required, I still want some good tools. They should be available in Europe.

    I now have a TS100 and some soldering irons and looking for some better tools.

    1. Soldering station, budget around 200-240€
    JBC BT-2BWA seems to be a good product in the budget.

    2. Hot air station, budget around 200€
    Up to now I've found ATTEN ST-862D to be a good option.

    What do you think about these products? Do you have some other recommendations in about the same budget, or lower budget if you think I get about the same quality.

    Thanks.

    #2
    Re: Recommendations of quality soldering station and (separate) hot air station

    I have the Atten, it's an awesome piece of kit.
    Have a a look at the PACE ADS200, there's a big thread over on eevblog about it

    Comment


      #3
      Re: Recommendations of quality soldering station and (separate) hot air station

      get a JBC or a clone,
      you will save a fortune in tip cost compared to the pace crap.

      Comment


        #4
        Re: Recommendations of quality soldering station and (separate) hot air station

        Originally posted by stj View Post
        get a JBC or a clone,
        you will save a fortune in tip cost compared to the pace crap.
        The price is around the same for the tips for the Pace or JBC.
        If the fake stations are like the one Northridgefix tried out the firmware is absolute garbage and the station was unusable.

        Comment


          #5
          Re: Recommendations of quality soldering station and (separate) hot air station

          there are lots of JBC compatable stations now - some have great reviews.
          unlike a review i saw for the pace

          Comment


            #6
            Re: Recommendations of quality soldering station and (separate) hot air station

            Why a knock off when you can get an original JBC at about the same price?

            Comment


              #7
              Re: Recommendations of quality soldering station and (separate) hot air station

              I have a cheap ZD 8908 hot air station using it i found :
              It is good for small cms components that have exposed pads...
              It is really bad for chips and IC's especially in multi-layer PCBs

              Comment


                #8
                Re: Recommendations of quality soldering station and (separate) hot air station

                What are “cms components”?

                Comment


                  #9
                  Re: Recommendations of quality soldering station and (separate) hot air station

                  Originally posted by stj View Post
                  there are lots of JBC compatable stations now - some have great reviews.
                  unlike a review i saw for the pace
                  Yes, I was looking at the i2c stations which seem garbage, the Aixun stations look good though, so good I bought the T3B. Half tempted to the the T3A also.

                  They are about a third of the price caprider.

                  Comment


                    #10
                    Re: Recommendations of quality soldering station and (separate) hot air station

                    Aixun reviews
                    https://www.youtube.com/c/Sdgelectronics/videos

                    Comment


                      #11
                      Re: Recommendations of quality soldering station and (separate) hot air station

                      Im looking for an update on my KSGER T12 also, T3A T245 clone, Pace ADS200 or save up for the real deal? (JBC)

                      Comment


                        #12
                        Re: Recommendations of quality soldering station and (separate) hot air station

                        The T3B beats the KSGER on power and doesn't have an iffy power supply. I've also bought a T3A after being impressed with the T3B. Watch the review stj links.

                        Comment


                          #13
                          Re: Recommendations of quality soldering station and (separate) hot air station

                          Originally posted by diif View Post
                          The T3B beats the KSGER on power and doesn't have an iffy power supply. I've also bought a T3A after being impressed with the T3B. Watch the review stj links.
                          Thanks, indeed looks half decent to me!

                          Comment


                            #14
                            Re: Recommendations of quality soldering station and (separate) hot air station

                            Indeed AiXun T3B is first option for nano and precise components.

                            Comment


                              #15
                              Re: Recommendations of quality soldering station and (separate) hot air station

                              Originally posted by stj View Post
                              Aixun T3A for me. And I am very happy with mine.

                              Comment

                              Working...
                              X