Announcement

Collapse

Forum Rules *ALL NEW MEMBERS, PLEASE READ!! UPDATED!!*

First and foremost, Welcome to the Badcaps Capacitor Search Engine & Forums!

New members that have activated their accounts have limited access to certain features of the site until established. Members with zero posts have no access to the private messaging system. Also, members with zero posts may not edit certain profile attributes, such as signatures. New members also may not create new threads. However, new members with zero posts have full access to all technical information contained on this forum, and that also includes attachments (images and files that other members have uploaded), and new members that have activated their accounts are free to post replies to existing threads. If you wish to create a new thread, the fix is simple! All you need is ONE post to be able to have full unrestricted access, and that can be simply posting an introduction of yourself or say hello in THIS THREAD. This may seem a little strange, but it helps keep spam and abuse curved. Please note, that it may take up to one hour from your first post for the limits to be removed. If you make a post and don't immediately see the restrictions gone, be patient. The promotion system updates every hour.

Please complete your profile after making your first post, with your name, locale, and other info. It's nice to know members on a first name basis, and know where they're from. Makes for a much friendlier environment!

Posting rules for this forum will be STRICTLY enforced by myself as the owner/administrator, and my moderator crew.

Badcaps.net IS A BUSINESS!!! If you are a servicer, service center, or vendor of any kind in the computer/capacitor industry, you are NOT permitted to advertise, link, promote, or plug your business on this forum in ANY way! NO EXCEPTIONS!! This includes asking for "donations" in exchange for BIOS passwords or tech advice for anything! If I see you doing that, your post will be edited or deleted, and you warned. If it happens again, you will be banned. The only exceptions are the references to the companies quoted in the FAQ which the administration have added for the convenience of those around the world who have difficulty to source caps for their repair.

This also includes using this forum's private message system to solicit business. Members, if you receive a PM from anyone offering repair services or components, please alert me immediately! Myself or any of my moderators, will never private message a user soliciting business, for Badcaps.net, or any other servicer/vendor. If you PM me about repairing your device, I will reply and take care of you, however, I will not message you first.

------------------------------------

Posting rules:

This forum was created to be a technical support forum primarily for the do-it-yourselfers who choose to repair their own boards. Any and all technical questions are welcome!

1) Please use the SEARCH feature!! Your question may have been answered in another thread! Please search first and see if it has!

2) When posting a technical question, be as detailed as possible in your thread. The more information we have about your specific problem, the better we can answer your question.

3) Please use COMPLETE sentences, punctuation, and grammar! Nobody is perfect, hence, a spelling error on occasion is no biggie. However, posts/threads that are unreadable will be deleted. This includes any and all forms of 'ebonics', leet, chatroom jargon, and 'text message' shorthand and slang. This forum is not a chatroom/text message, please use full words and complete sentences.

4) Keep discussion on topic!! DO NOT HIJACK THREADS! It's easy to do (I've done it myself a few times...) Lets try to keep it down to a minimal!! If you have something really off topic, that's what the lounge is for!

5) Keep things civil! There will be no tolerance for flaming, bashing, hateful remarks, racial remarks, adult material of ANY kind, and so on.

6) THE LOUNGE RULES! The lounge is a place for off topic chit-chat! If you post something that might be considered questionable or something you don't want kids to see, or something you can't view at work/school, etc, please label that thread *NWS* or NOT WORK SAFE in the thread title as a warning. The Lounge is NOT moderated, anything is welcome... Feel free to post rants, jokes, cars, hot women (remember the NWS warning in the title), or just about anything within reason. It's an open forum! Please refrain from participating in political topics if you have thin skin, they can get heated sometimes!! Remember that we have members here from all over the world, with many different views and cultures. Political debates can turn really ugly, and really fast, and if they degrade to personal attacks and useless banter/bashing, moderator action will ensue. I want this forum to be a safe haven for technical discussions from all walks of life, so lets keep off topic discussions civil and friendly.

7) Spamming and spammers will NOT be tolerated or accepted in any way, shape, or form! Spam bots are instantly and permanently banned, and their threads deleted! The mod crew is really quick to zap spammers, we typically pop them before they even get to post. This also includes regular members as well. be courteous and not post spam. This includes links to off-site information that's not relevant to the thread at hand. Do not plug other websites, forums, or businesses in your signatures. You may do so in a thread if the off-site link you're posting is relevant to the topic, but otherwise, don't do it. If you see a thread which clearly a spam bot posting that we have not removed yet, DO NOT click any links in it!! Simply click the 'report bad post' button, and it'll be taken care of, usually within minutes.

8) Account removals & closures: Since no personal information is given in the creation of your Badcaps.net Forum account, requests to remove and/or delete accounts will be declined. Any requests for removal of threads & posts you created will also be declined. The reason is the missing posts can/will leave threads incomplete and fragmented. For the threads to be of help to others later on, information can't and won't be missing. However, if you inadvertently posted personal identifiable information in a post (such as an email address, real name, or phone number), please contact a staff member. In those cases, the post may be edited or removed, at the staff members discretion.

That's about it for the rules, the setup here is pretty loose. However, if you're caught violating any of the rules above, here's what will happen:

First offense: Warning by me or a moderator
Second offense: Banning for 1 day
Third offense: Banning for 3 days
Fourth offense: Banned permanently.

If you do something really dumb, or are just a troll, I will skip the warning and the temporary banning, and ban you permanently!

The rules are pretty cut and dry... However, if you have any questions about this policy, feel free to contact me.
See more
See less

KSGER New Battery BMS Version Review

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    KSGER New Battery BMS Version Review

    This BMS board has promise it made like most BMS battery board I seen before but this one is made to use the power supply input jack and the power supply supply switch

    The first dispointment is the batteries that are used are no brand name batteries they claim 2 amp hour maybe this might be the case but I have not done a battery charge and discharge cycle yet so I can not comment on this yet so we will see if this claim is true or not

    But I going to use the Samsung battery out of a Kobalt battery from Lowe’s for $20.00

    The charger that comes with it says 2 amps @ 25.2 volts we will see what is inside this switching power supply and let you know if it worth a shit or not

    Here is a web link where to buy one go to product selection and you will see the kit with the a switching power supply

    http://s.aliexpress.com/fqYNf2A3
    Attached Files
    Last edited by sam_sam_sam; 08-31-2019, 10:43 AM.
    9 PC LCD Monitor
    6 LCD Flat Screen TV
    30 Desk Top Switching Power Supply
    10 Battery Charger Switching Power Supply for Power Tool
    6 18v Lithium Battery Power Boards for Tool Battery Packs
    1 XBox 360 Switching Power Supply and M Board
    25 Servo Drives 220/460 3 Phase
    6 De-soldering Station Switching Power Supply 1 Power Supply
    1 Dell Mother Board
    15 Computer Power Supply
    1 HP Printer Supply & Control Board * lighting finished it *


    These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

    1 Over Head Crane Current Sensing Board ( VFD Failure Five Years Later )
    2 Hem Saw Computer Stack Board

    All of these had CAPs POOF
    All of the mosfet that are taken out by bad caps

    #2
    Re: KSGER New Battery BMS Version Review

    did you see the new balancers on julien illet's vid?
    https://www.youtube.com/watch?v=Fb52fVaMeY8

    Comment


      #3
      Re: KSGER New Battery BMS Version Review

      Originally posted by stj View Post
      did you see the new balancers on julien illet's vid?
      https://www.youtube.com/watch?v=Fb52fVaMeY8
      I was impressed with his demonstration of that board ( I have seen some of his YouTube videos before ) I am not very easily impressed

      Thanks for sharing this I was wondering if there was such a thing like this but I still think you would have to have a protection board for each cell for you to be safe working with these batteries
      Last edited by sam_sam_sam; 08-31-2019, 01:15 PM.
      9 PC LCD Monitor
      6 LCD Flat Screen TV
      30 Desk Top Switching Power Supply
      10 Battery Charger Switching Power Supply for Power Tool
      6 18v Lithium Battery Power Boards for Tool Battery Packs
      1 XBox 360 Switching Power Supply and M Board
      25 Servo Drives 220/460 3 Phase
      6 De-soldering Station Switching Power Supply 1 Power Supply
      1 Dell Mother Board
      15 Computer Power Supply
      1 HP Printer Supply & Control Board * lighting finished it *


      These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

      1 Over Head Crane Current Sensing Board ( VFD Failure Five Years Later )
      2 Hem Saw Computer Stack Board

      All of these had CAPs POOF
      All of the mosfet that are taken out by bad caps

      Comment


        #4
        Re: KSGER New Battery BMS Version Review

        i think that's the idea, you can get 2 or 3 cell ones - maybe more.
        and they have that circuit for each cell/cell-pair

        Comment


          #5
          Re: KSGER New Battery BMS Version Review

          Here are some pictures of the switching power supply board

          I have some comments about this charging board the first thing is that the temperature of the case does not any warmer than 102*F which I like

          The other thing is that the battery pack for soldering station battery voltage was at 24 volts on the soldering station controller which very close to my Radio Shack meter that I use all the time the charger brought the battery voltage to 25.3 volts and stop charging very good results

          What do you think about this charging board
          Attached Files
          9 PC LCD Monitor
          6 LCD Flat Screen TV
          30 Desk Top Switching Power Supply
          10 Battery Charger Switching Power Supply for Power Tool
          6 18v Lithium Battery Power Boards for Tool Battery Packs
          1 XBox 360 Switching Power Supply and M Board
          25 Servo Drives 220/460 3 Phase
          6 De-soldering Station Switching Power Supply 1 Power Supply
          1 Dell Mother Board
          15 Computer Power Supply
          1 HP Printer Supply & Control Board * lighting finished it *


          These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

          1 Over Head Crane Current Sensing Board ( VFD Failure Five Years Later )
          2 Hem Saw Computer Stack Board

          All of these had CAPs POOF
          All of the mosfet that are taken out by bad caps

          Comment


            #6
            Re: KSGER New Battery BMS Version Review

            It looks like six of a single cell charge controller/balancer circuits.
            At least the form-factor is better to fit inside an enclosure.

            I don't like the small chinese copy JST connector because they're crap and not rated for high currents or fatter wire. I would expect it to give problems.

            Comment


              #7
              Re: KSGER New Battery BMS Version Review

              I would say the PSU has good bad and ugly.
              Good - heatsinks and lots of electronics, the board looks like a modified LED or laptop design.
              Missing common-mode choke for EMC and PTC for inrush current.

              Fail - primary to secondary spacings. The PCB board is a bad design for clearance, so ensure the DC output is earth-grounded for safety.

              I would say it's OK, medium quality.
              Attached Files

              Comment


                #8
                Re: KSGER New Battery BMS Version Review

                Originally posted by redwire View Post
                I would say the PSU has good bad and ugly.
                Good - heatsinks and lots of electronics, the board looks like a modified LED or laptop design.
                Missing common-mode choke for EMC and PTC for inrush current.

                Fail - primary to secondary spacings. The PCB board is a bad design for clearance, so ensure the DC output is earth-grounded for safety.

                I would say it's OK, medium quality.
                Thank you for your comments about this charger I will not leave plugged in when not charging batteries and will keep an eye on it when using it

                The component is a switching device and a power resistor and a diode of some type and a cap between the primary and secondary of the switching power supply board
                Last edited by sam_sam_sam; 08-31-2019, 04:12 PM.
                9 PC LCD Monitor
                6 LCD Flat Screen TV
                30 Desk Top Switching Power Supply
                10 Battery Charger Switching Power Supply for Power Tool
                6 18v Lithium Battery Power Boards for Tool Battery Packs
                1 XBox 360 Switching Power Supply and M Board
                25 Servo Drives 220/460 3 Phase
                6 De-soldering Station Switching Power Supply 1 Power Supply
                1 Dell Mother Board
                15 Computer Power Supply
                1 HP Printer Supply & Control Board * lighting finished it *


                These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

                1 Over Head Crane Current Sensing Board ( VFD Failure Five Years Later )
                2 Hem Saw Computer Stack Board

                All of these had CAPs POOF
                All of the mosfet that are taken out by bad caps

                Comment


                  #9
                  Re: KSGER New Battery BMS Version Review

                  Originally posted by redwire View Post
                  It looks like six of a single cell charge controller/balancer circuits.
                  At least the form-factor is better to fit inside an enclosure.

                  I don't like the small chinese copy JST connector because they're crap and not rated for high currents or fatter wire. I would expect it to give problems.
                  I know this as well and plan on doing something different but have not decided on what

                  One thought is to remove the two power supply wires from the connectors and leave the other ones
                  Last edited by sam_sam_sam; 08-31-2019, 03:44 PM.
                  9 PC LCD Monitor
                  6 LCD Flat Screen TV
                  30 Desk Top Switching Power Supply
                  10 Battery Charger Switching Power Supply for Power Tool
                  6 18v Lithium Battery Power Boards for Tool Battery Packs
                  1 XBox 360 Switching Power Supply and M Board
                  25 Servo Drives 220/460 3 Phase
                  6 De-soldering Station Switching Power Supply 1 Power Supply
                  1 Dell Mother Board
                  15 Computer Power Supply
                  1 HP Printer Supply & Control Board * lighting finished it *


                  These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

                  1 Over Head Crane Current Sensing Board ( VFD Failure Five Years Later )
                  2 Hem Saw Computer Stack Board

                  All of these had CAPs POOF
                  All of the mosfet that are taken out by bad caps

                  Comment


                    #10
                    Re: KSGER New Battery BMS Version Review

                    Originally posted by stj View Post
                    i think that's the idea, you can get 2 or 3 cell ones - maybe more.
                    and they have that circuit for each cell/cell-pair

                    Most of them have some type of balancing circuit of some kind that why I made comment about the protection board for each cell but I would have to do some testing to how it would work
                    9 PC LCD Monitor
                    6 LCD Flat Screen TV
                    30 Desk Top Switching Power Supply
                    10 Battery Charger Switching Power Supply for Power Tool
                    6 18v Lithium Battery Power Boards for Tool Battery Packs
                    1 XBox 360 Switching Power Supply and M Board
                    25 Servo Drives 220/460 3 Phase
                    6 De-soldering Station Switching Power Supply 1 Power Supply
                    1 Dell Mother Board
                    15 Computer Power Supply
                    1 HP Printer Supply & Control Board * lighting finished it *


                    These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

                    1 Over Head Crane Current Sensing Board ( VFD Failure Five Years Later )
                    2 Hem Saw Computer Stack Board

                    All of these had CAPs POOF
                    All of the mosfet that are taken out by bad caps

                    Comment


                      #11
                      Re: KSGER New Battery BMS Version Review

                      Originally posted by stj View Post
                      did you see the new balancers on julien illet's vid?
                      https://www.youtube.com/watch?v=Fb52fVaMeY8

                      I have bought one of these to try it out and see if it needs anything else for it work right when I have the answers I will post them here on this post
                      9 PC LCD Monitor
                      6 LCD Flat Screen TV
                      30 Desk Top Switching Power Supply
                      10 Battery Charger Switching Power Supply for Power Tool
                      6 18v Lithium Battery Power Boards for Tool Battery Packs
                      1 XBox 360 Switching Power Supply and M Board
                      25 Servo Drives 220/460 3 Phase
                      6 De-soldering Station Switching Power Supply 1 Power Supply
                      1 Dell Mother Board
                      15 Computer Power Supply
                      1 HP Printer Supply & Control Board * lighting finished it *


                      These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

                      1 Over Head Crane Current Sensing Board ( VFD Failure Five Years Later )
                      2 Hem Saw Computer Stack Board

                      All of these had CAPs POOF
                      All of the mosfet that are taken out by bad caps

                      Comment


                        #12
                        Re: KSGER New Battery BMS Version Review

                        Things did not go well I was going to use my battery spot welders ( two of them different models but made by the same company ) but it would not fire the transformer again these Chinese Battery Spot Welder Controller are real CRAP you get about a year of use out of them

                        The transformer are very good I have not any real problem with them

                        I found some battery spot welder controllers for about $15.00 each which I going to use and when it does not want to work any more just replace with another controller

                        Because I enough welders with high output transformers that the controllers went bad
                        Last edited by sam_sam_sam; 09-04-2019, 04:35 PM.
                        9 PC LCD Monitor
                        6 LCD Flat Screen TV
                        30 Desk Top Switching Power Supply
                        10 Battery Charger Switching Power Supply for Power Tool
                        6 18v Lithium Battery Power Boards for Tool Battery Packs
                        1 XBox 360 Switching Power Supply and M Board
                        25 Servo Drives 220/460 3 Phase
                        6 De-soldering Station Switching Power Supply 1 Power Supply
                        1 Dell Mother Board
                        15 Computer Power Supply
                        1 HP Printer Supply & Control Board * lighting finished it *


                        These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

                        1 Over Head Crane Current Sensing Board ( VFD Failure Five Years Later )
                        2 Hem Saw Computer Stack Board

                        All of these had CAPs POOF
                        All of the mosfet that are taken out by bad caps

                        Comment


                          #13
                          Re: KSGER New Battery BMS Version Review

                          check the big transistor - i have seen people talking about this before.

                          Comment


                            #14
                            Re: KSGER New Battery BMS Version Review

                            Originally posted by stj View Post
                            check the big transistor - i have seen people talking about this before.
                            On one of them the adjustment does not work right you have to hold the set button to change the current and the cycle settings so on this one something is not quite right with the microcomputer on this one this one is going to get the new controller set up

                            The other one it might be the big transistor I have not had time to look at this one yet
                            9 PC LCD Monitor
                            6 LCD Flat Screen TV
                            30 Desk Top Switching Power Supply
                            10 Battery Charger Switching Power Supply for Power Tool
                            6 18v Lithium Battery Power Boards for Tool Battery Packs
                            1 XBox 360 Switching Power Supply and M Board
                            25 Servo Drives 220/460 3 Phase
                            6 De-soldering Station Switching Power Supply 1 Power Supply
                            1 Dell Mother Board
                            15 Computer Power Supply
                            1 HP Printer Supply & Control Board * lighting finished it *


                            These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

                            1 Over Head Crane Current Sensing Board ( VFD Failure Five Years Later )
                            2 Hem Saw Computer Stack Board

                            All of these had CAPs POOF
                            All of the mosfet that are taken out by bad caps

                            Comment


                              #15
                              Re: KSGER New Battery BMS Version Review

                              May I ask which battery spot welder that you buy?
                              Never stop learning
                              Basic LCD TV and Monitor troubleshooting guides.
                              http://www.badcaps.net/forum/showthr...956#post305956

                              Voltage Regulator (LDO) testing:
                              http://www.badcaps.net/forum/showthr...999#post300999

                              Inverter testing using old CFL:
                              http://www.badcaps.net/forum/showthr...er+testing+cfl

                              Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                              http://s807.photobucket.com/user/budm/library/

                              TV Factory reset codes listing:
                              http://www.badcaps.net/forum/showthread.php?t=24809

                              Comment

                              Working...
                              X