Announcement

Collapse

Forum Rules *ALL NEW MEMBERS, PLEASE READ!! UPDATED!!*

First and foremost, Welcome to the Badcaps Capacitor Search Engine & Forums!

New members that have activated their accounts have limited access to certain features of the site until established. Members with zero posts have no access to the private messaging system. Also, members with zero posts may not edit certain profile attributes, such as signatures. New members also may not create new threads. However, new members with zero posts have full access to all technical information contained on this forum, and that also includes attachments (images and files that other members have uploaded), and new members that have activated their accounts are free to post replies to existing threads. If you wish to create a new thread, the fix is simple! All you need is ONE post to be able to have full unrestricted access, and that can be simply posting an introduction of yourself or say hello in THIS THREAD. This may seem a little strange, but it helps keep spam and abuse curved. Please note, that it may take up to one hour from your first post for the limits to be removed. If you make a post and don't immediately see the restrictions gone, be patient. The promotion system updates every hour.

Please complete your profile after making your first post, with your name, locale, and other info. It's nice to know members on a first name basis, and know where they're from. Makes for a much friendlier environment!

Posting rules for this forum will be STRICTLY enforced by myself as the owner/administrator, and my moderator crew.

Badcaps.net IS A BUSINESS!!! If you are a servicer, service center, or vendor of any kind in the computer/capacitor industry, you are NOT permitted to advertise, link, promote, or plug your business on this forum in ANY way! NO EXCEPTIONS!! This includes asking for "donations" in exchange for BIOS passwords or tech advice for anything! If I see you doing that, your post will be edited or deleted, and you warned. If it happens again, you will be banned. The only exceptions are the references to the companies quoted in the FAQ which the administration have added for the convenience of those around the world who have difficulty to source caps for their repair.

This also includes using this forum's private message system to solicit business. Members, if you receive a PM from anyone offering repair services or components, please alert me immediately! Myself or any of my moderators, will never private message a user soliciting business, for Badcaps.net, or any other servicer/vendor. If you PM me about repairing your device, I will reply and take care of you, however, I will not message you first.

------------------------------------

Posting rules:

This forum was created to be a technical support forum primarily for the do-it-yourselfers who choose to repair their own boards. Any and all technical questions are welcome!

1) Please use the SEARCH feature!! Your question may have been answered in another thread! Please search first and see if it has!

2) When posting a technical question, be as detailed as possible in your thread. The more information we have about your specific problem, the better we can answer your question.

3) Please use COMPLETE sentences, punctuation, and grammar! Nobody is perfect, hence, a spelling error on occasion is no biggie. However, posts/threads that are unreadable will be deleted. This includes any and all forms of 'ebonics', leet, chatroom jargon, and 'text message' shorthand and slang. This forum is not a chatroom/text message, please use full words and complete sentences.

4) Keep discussion on topic!! DO NOT HIJACK THREADS! It's easy to do (I've done it myself a few times...) Lets try to keep it down to a minimal!! If you have something really off topic, that's what the lounge is for!

5) Keep things civil! There will be no tolerance for flaming, bashing, hateful remarks, racial remarks, adult material of ANY kind, and so on.

6) THE LOUNGE RULES! The lounge is a place for off topic chit-chat! If you post something that might be considered questionable or something you don't want kids to see, or something you can't view at work/school, etc, please label that thread *NWS* or NOT WORK SAFE in the thread title as a warning. The Lounge is NOT moderated, anything is welcome... Feel free to post rants, jokes, cars, hot women (remember the NWS warning in the title), or just about anything within reason. It's an open forum! Please refrain from participating in political topics if you have thin skin, they can get heated sometimes!! Remember that we have members here from all over the world, with many different views and cultures. Political debates can turn really ugly, and really fast, and if they degrade to personal attacks and useless banter/bashing, moderator action will ensue. I want this forum to be a safe haven for technical discussions from all walks of life, so lets keep off topic discussions civil and friendly.

7) Spamming and spammers will NOT be tolerated or accepted in any way, shape, or form! Spam bots are instantly and permanently banned, and their threads deleted! The mod crew is really quick to zap spammers, we typically pop them before they even get to post. This also includes regular members as well. be courteous and not post spam. This includes links to off-site information that's not relevant to the thread at hand. Do not plug other websites, forums, or businesses in your signatures. You may do so in a thread if the off-site link you're posting is relevant to the topic, but otherwise, don't do it. If you see a thread which clearly a spam bot posting that we have not removed yet, DO NOT click any links in it!! Simply click the 'report bad post' button, and it'll be taken care of, usually within minutes.

8) Account removals & closures: Since no personal information is given in the creation of your Badcaps.net Forum account, requests to remove and/or delete accounts will be declined. Any requests for removal of threads & posts you created will also be declined. The reason is the missing posts can/will leave threads incomplete and fragmented. For the threads to be of help to others later on, information can't and won't be missing. However, if you inadvertently posted personal identifiable information in a post (such as an email address, real name, or phone number), please contact a staff member. In those cases, the post may be edited or removed, at the staff members discretion.

That's about it for the rules, the setup here is pretty loose. However, if you're caught violating any of the rules above, here's what will happen:

First offense: Warning by me or a moderator
Second offense: Banning for 1 day
Third offense: Banning for 3 days
Fourth offense: Banned permanently.

If you do something really dumb, or are just a troll, I will skip the warning and the temporary banning, and ban you permanently!

The rules are pretty cut and dry... However, if you have any questions about this policy, feel free to contact me.
See more
See less

KSGER Battery BMS charge battery board review

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • sam_sam_sam
    Badcaps Veteran
    • Jul 2011
    • 4679
    • USA

    KSGER Battery BMS charge battery board review

    Here is how I test this board as follows

    One I installed new 18650 Panasonic battery I have had a couple years
    All batteries had a battery voltage of 3.6-something

    Put it on a bench power supply set at one amp worked for about an hour then the balancing board LED started flashing on one battery then on another battery then back off the amperage down to .75 amps then about half hour the same two balancing LED light started flashing again back off the amperage again down to .5 amps 15 minuets later had to back it off again to .3 amps then a couple more came on then one side changed faster than the other side

    Because one side of the charges faster than the other side does the charger turned off and charging on both sides stopped

    When I put a MR16 light bulb and brought the battery voltage below 4.0 volts the charger started charging again until the battery voltage came back up to 4.0 volts again I had to do this several times before the other side was basically at the same voltage

    Then I put the charger rate at .030 amps until all balancing LED lights were all ON and the charger had changed all batteries to 4.0

    The next test I going to do is to put a load on this BMS board until the board shuts down the power output then check each battery voltage to see how well it works

    To set this board up to work took some work there NO data sheet for this board that I could find

    There are three jumper pad under the battery stack that you have to jump together

    There is a positive power rail that has to be jumped

    There is a two jumpers for two sets of three batteries for each side

    There is a jumper to turn on the charging /discharging circuit to turn it ON
    Attached Files
    9 PC LCD Monitor
    6 LCD Flat Screen TV
    30 Desk Top Switching Power Supply
    10 Battery Charger Switching Power Supply for Power Tool
    6 18v Lithium Battery Power Boards for Tool Battery Packs
    1 XBox 360 Switching Power Supply and M Board
    25 Servo Drives 220/460 3 Phase
    6 De-soldering Station Switching Power Supply 1 Power Supply
    1 Dell Mother Board
    15 Computer Power Supply
    1 HP Printer Supply & Control Board * lighting finished it *


    These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

    1 Over Head Crane Current Sensing Board ( VFD Failure Five Years Later )
    2 Hem Saw Computer Stack Board

    All of these had CAPs POOF
    All of the mosfet that are taken out by bad caps
  • sam_sam_sam
    Badcaps Veteran
    • Jul 2011
    • 4679
    • USA

    #2
    Re: KSGER Battery BMS charge battery board review

    One note about when all battery voltages gets 4 volts to completely change each battery to the same exact value I set bench power supply to .003 amps and leave for a long time before all the balancing LEDs turn off and the charger finally finished charging

    I realize that I should have have changed each battery first and load test each one for milliamperes hour rate results

    But the reason I did not I want to see if BMS Balanced Board could handle this type condition results are the following

    On a scale one being ( does not work at all ) and ( ten could handle any condition you could give it ) I give it less than a <— 5

    I would have given it a higher rating If I did not have to balance it my self to keep it charging that took few points from it

    But in all fairness I will do several changes / discharging cycles and see if the results are better
    9 PC LCD Monitor
    6 LCD Flat Screen TV
    30 Desk Top Switching Power Supply
    10 Battery Charger Switching Power Supply for Power Tool
    6 18v Lithium Battery Power Boards for Tool Battery Packs
    1 XBox 360 Switching Power Supply and M Board
    25 Servo Drives 220/460 3 Phase
    6 De-soldering Station Switching Power Supply 1 Power Supply
    1 Dell Mother Board
    15 Computer Power Supply
    1 HP Printer Supply & Control Board * lighting finished it *


    These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

    1 Over Head Crane Current Sensing Board ( VFD Failure Five Years Later )
    2 Hem Saw Computer Stack Board

    All of these had CAPs POOF
    All of the mosfet that are taken out by bad caps

    Comment

    • redwire
      Badcaps Veteran
      • Dec 2010
      • 3413
      • Canada

      #3
      Re: KSGER Battery BMS charge battery board review

      I could only find more info in chinese and run webpage through google translate for some of it. https://item.taobao.com/item.htm?id=559209639154

      It's supposed to be a high performance battery management chip BM3451. R41 sets current limit at 10A.

      "The principle is that the first fully charged battery will discharge through a circuit (the indicator light will be on during equalization discharge), so that the circuit will not be over-voltage protected, and other unfilled batteries can continue. Charge until all is fully charged."

      "Note: The 6 indicators on the equalization board are equalization discharge indicators. Only when the battery reaches 4.18V, the equalization discharge may be started. When the battery is discharged to 4.15V, the discharge lamp will be stopped. The lamp will also turn off when the voltage is greater than 4.2V or 4.25V, and the charging switch will be automatically turned off. In the critical state, there will be flashing lights. This is normal. Generally, 6 lights in the full charge will be completely extinguished. However, sometimes due to the imbalance of the battery, it takes a long time to fully charge. Generally, the battery is only required. The group voltage is above 24.6V, which can be considered to be full and the battery is basically balanced. It is normal to have a voltage difference between zero and a few V between the batteries. In short, the specific working mode of the chipset is a bit complicated. If you want to know, you can look at the chip manual of the chip BM3451."
      Attached Files

      Comment

      • sam_sam_sam
        Badcaps Veteran
        • Jul 2011
        • 4679
        • USA

        #4
        Re: KSGER Battery BMS charge battery board review

        I see what you mean about this IC chip it is very complicated in what it does I have not read the hole manual yet but I will when I have some more time
        9 PC LCD Monitor
        6 LCD Flat Screen TV
        30 Desk Top Switching Power Supply
        10 Battery Charger Switching Power Supply for Power Tool
        6 18v Lithium Battery Power Boards for Tool Battery Packs
        1 XBox 360 Switching Power Supply and M Board
        25 Servo Drives 220/460 3 Phase
        6 De-soldering Station Switching Power Supply 1 Power Supply
        1 Dell Mother Board
        15 Computer Power Supply
        1 HP Printer Supply & Control Board * lighting finished it *


        These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

        1 Over Head Crane Current Sensing Board ( VFD Failure Five Years Later )
        2 Hem Saw Computer Stack Board

        All of these had CAPs POOF
        All of the mosfet that are taken out by bad caps

        Comment

        • sam_sam_sam
          Badcaps Veteran
          • Jul 2011
          • 4679
          • USA

          #5
          Re: KSGER Battery BMS charge battery board review

          I have had the load about 1.0 amp load it has on for about 4 hours and still going

          CGR18650CG Panasonic Batteries

          So will have to wait until the BMS Balanced Board shutdowns the battery voltage
          to see how well it works
          Last edited by sam_sam_sam; 06-15-2019, 06:32 PM.
          9 PC LCD Monitor
          6 LCD Flat Screen TV
          30 Desk Top Switching Power Supply
          10 Battery Charger Switching Power Supply for Power Tool
          6 18v Lithium Battery Power Boards for Tool Battery Packs
          1 XBox 360 Switching Power Supply and M Board
          25 Servo Drives 220/460 3 Phase
          6 De-soldering Station Switching Power Supply 1 Power Supply
          1 Dell Mother Board
          15 Computer Power Supply
          1 HP Printer Supply & Control Board * lighting finished it *


          These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

          1 Over Head Crane Current Sensing Board ( VFD Failure Five Years Later )
          2 Hem Saw Computer Stack Board

          All of these had CAPs POOF
          All of the mosfet that are taken out by bad caps

          Comment

          • sam_sam_sam
            Badcaps Veteran
            • Jul 2011
            • 4679
            • USA

            #6
            Re: KSGER Battery BMS charge battery board review

            UpDate

            It charged a lot better this time I did not have to help with a MR16 light bulb this time and the voltages are lot closer together

            The cut off voltage is 3.something volts but the battery voltages were all over the place not even close to each other———>

            But I had to do something that should ONLY done with caution

            ( this is a disclaimer warning )

            I used the MR16 light bulb on each cell unit each cell voltage with a load was about 1 volt and with no load about 2.something volts then very slowly charging at 100 milliamperes until the voltage on the hole battery pack was at 20 volts then went to 750 milliamperes until it was full charged

            This is because some BMS Balanced Board are a pain in the ass to get all the batteries to become fully charged and sometimes it does not matter if the voltage values are not that close it just works when you remove power and reconnect the power and you should not see any current flow then you know that the battery is fully charged

            I have done this few times before with very good results but should only be done a few times and then leave it a lone

            Now my problem is finding a 150mm case to hold the battery pack and the soldering controller and the power supply jack in one case I found one but now I have to wait until the seller has a sale tomorrow
            Last edited by sam_sam_sam; 06-16-2019, 08:13 PM.
            9 PC LCD Monitor
            6 LCD Flat Screen TV
            30 Desk Top Switching Power Supply
            10 Battery Charger Switching Power Supply for Power Tool
            6 18v Lithium Battery Power Boards for Tool Battery Packs
            1 XBox 360 Switching Power Supply and M Board
            25 Servo Drives 220/460 3 Phase
            6 De-soldering Station Switching Power Supply 1 Power Supply
            1 Dell Mother Board
            15 Computer Power Supply
            1 HP Printer Supply & Control Board * lighting finished it *


            These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

            1 Over Head Crane Current Sensing Board ( VFD Failure Five Years Later )
            2 Hem Saw Computer Stack Board

            All of these had CAPs POOF
            All of the mosfet that are taken out by bad caps

            Comment

            • redwire
              Badcaps Veteran
              • Dec 2010
              • 3413
              • Canada

              #7
              Re: KSGER Battery BMS charge battery board review

              The BMS IC datasheet says it needs many charge/discharge cycles to fully equalize a pack that is poorly balanced. High value balancing resistors like 510R on the KSGER battery board are 7.3mA delta per cell, around 3%.

              Which enclosure are you looking for. The usual 88mm wide aluminum extrusion houses these T12 stations. It's not expensive if you don't mind cutting the holes. But the T12 version with holes punched is triple the price.

              Comment

              • sam_sam_sam
                Badcaps Veteran
                • Jul 2011
                • 4679
                • USA

                #8
                Re: KSGER Battery BMS charge battery board review

                It the length of the case is the problem the 130mm is not long enough
                9 PC LCD Monitor
                6 LCD Flat Screen TV
                30 Desk Top Switching Power Supply
                10 Battery Charger Switching Power Supply for Power Tool
                6 18v Lithium Battery Power Boards for Tool Battery Packs
                1 XBox 360 Switching Power Supply and M Board
                25 Servo Drives 220/460 3 Phase
                6 De-soldering Station Switching Power Supply 1 Power Supply
                1 Dell Mother Board
                15 Computer Power Supply
                1 HP Printer Supply & Control Board * lighting finished it *


                These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

                1 Over Head Crane Current Sensing Board ( VFD Failure Five Years Later )
                2 Hem Saw Computer Stack Board

                All of these had CAPs POOF
                All of the mosfet that are taken out by bad caps

                Comment

                • redwire
                  Badcaps Veteran
                  • Dec 2010
                  • 3413
                  • Canada

                  #9
                  Re: KSGER Battery BMS charge battery board review

                  A T12 soldering station large enclosure is 130mm L x88 W x38 H for the 24V mains PSU and controller.

                  The 88mm aluminum extrusion is common in china and you can get longer clamshell pieces or custom cut to any length you like, and you keep your end plates.
                  But china seems to have stopped dumping aluminum products and the trade tariffs have driven up prices, shipping expensive- so no longer a deal.
                  I would ask vendors to price two long pieces.
                  Attached Files

                  Comment

                  • sam_sam_sam
                    Badcaps Veteran
                    • Jul 2011
                    • 4679
                    • USA

                    #10
                    Re: KSGER Battery BMS charge battery board review

                    I just bought two of them that 150mm long and will probably get them in about two to three weeks I also bought 2 more of these KSGER BMS Balanced Board and a soldering iron holder

                    I also bought another KSGER soldering iron controller from EBay however this unit came DOA will not power ON I have a case pending with EBay about this problem if the seller does not work with me on this problem it then I will ask EBay to step in


                    I got some T12 tips in that I bought from AliExpress and there behavior is a little odd

                    When you first power up the new soldering iron tip it shows the temperature / error then once it gets to 300c the error message stops flashing

                    Then if you power it down and let it cool down and then turn it back ON it does not flash the error message anymore but the temperature is all over the place at least 50c up and down but after a few minutes it comes to a more consented temperature

                    Then if power it down again and wait until it cools down again and power it ON and then the temperature is very consistent after that

                    What up with this
                    Last edited by sam_sam_sam; 06-18-2019, 03:55 PM.
                    9 PC LCD Monitor
                    6 LCD Flat Screen TV
                    30 Desk Top Switching Power Supply
                    10 Battery Charger Switching Power Supply for Power Tool
                    6 18v Lithium Battery Power Boards for Tool Battery Packs
                    1 XBox 360 Switching Power Supply and M Board
                    25 Servo Drives 220/460 3 Phase
                    6 De-soldering Station Switching Power Supply 1 Power Supply
                    1 Dell Mother Board
                    15 Computer Power Supply
                    1 HP Printer Supply & Control Board * lighting finished it *


                    These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

                    1 Over Head Crane Current Sensing Board ( VFD Failure Five Years Later )
                    2 Hem Saw Computer Stack Board

                    All of these had CAPs POOF
                    All of the mosfet that are taken out by bad caps

                    Comment

                    • stj
                      stj
                      Great Sage 齊天大聖
                      • Dec 2009
                      • 29505
                      • some shithole run by Israeli agents

                      #11
                      Re: KSGER Battery BMS charge battery board review

                      clean the contacts or shove each tip in and out a few times.

                      Comment

                      • sam_sam_sam
                        Badcaps Veteran
                        • Jul 2011
                        • 4679
                        • USA

                        #12
                        Re: KSGER Battery BMS charge battery board review

                        Originally posted by stj View Post
                        clean the contacts or shove each tip in and out a few times.
                        I have done this and it does not make a difference
                        I have taken apart the handle and adjust the spring contacts to make them more flush to the contacts it does not make a difference

                        After you get it to reach 300*c the first time and the error message stops flashing and after power it ON and OFF a few times then everything works the way it should even the feedback to the seller there few of them that have said the same exact problem

                        It is just weird results
                        9 PC LCD Monitor
                        6 LCD Flat Screen TV
                        30 Desk Top Switching Power Supply
                        10 Battery Charger Switching Power Supply for Power Tool
                        6 18v Lithium Battery Power Boards for Tool Battery Packs
                        1 XBox 360 Switching Power Supply and M Board
                        25 Servo Drives 220/460 3 Phase
                        6 De-soldering Station Switching Power Supply 1 Power Supply
                        1 Dell Mother Board
                        15 Computer Power Supply
                        1 HP Printer Supply & Control Board * lighting finished it *


                        These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

                        1 Over Head Crane Current Sensing Board ( VFD Failure Five Years Later )
                        2 Hem Saw Computer Stack Board

                        All of these had CAPs POOF
                        All of the mosfet that are taken out by bad caps

                        Comment

                        • redwire
                          Badcaps Veteran
                          • Dec 2010
                          • 3413
                          • Canada

                          #13
                          Re: KSGER Battery BMS charge battery board review

                          It sounds like a bad connection inside the tip/heater that goes away once it is hot. Like a dud (contaminated) spotweld/crimp inside.

                          T12 "ERROR" is when the thermocouple amp sees a fake silly high temperature. The stupid controller design is missing a 1MEG pullup, so noise can make the readings go all over the place with ERROR flashing at random if the tip/heater goes open circuit.

                          A dirty connection can give an intermittent extra thermocouple junction - say +4mV there could peg the temperature over 450C.

                          Comment

                          • sam_sam_sam
                            Badcaps Veteran
                            • Jul 2011
                            • 4679
                            • USA

                            #14
                            Re: KSGER Battery BMS charge battery board review

                            So if I understand this right

                            Then this nock off from a nock off another words crappy made shit about $2.00 for one soldering tip what can you expect
                            9 PC LCD Monitor
                            6 LCD Flat Screen TV
                            30 Desk Top Switching Power Supply
                            10 Battery Charger Switching Power Supply for Power Tool
                            6 18v Lithium Battery Power Boards for Tool Battery Packs
                            1 XBox 360 Switching Power Supply and M Board
                            25 Servo Drives 220/460 3 Phase
                            6 De-soldering Station Switching Power Supply 1 Power Supply
                            1 Dell Mother Board
                            15 Computer Power Supply
                            1 HP Printer Supply & Control Board * lighting finished it *


                            These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

                            1 Over Head Crane Current Sensing Board ( VFD Failure Five Years Later )
                            2 Hem Saw Computer Stack Board

                            All of these had CAPs POOF
                            All of the mosfet that are taken out by bad caps

                            Comment

                            • redwire
                              Badcaps Veteran
                              • Dec 2010
                              • 3413
                              • Canada

                              #15
                              Re: KSGER Battery BMS charge battery board review

                              What store did you buy the duds from?
                              T12 clone tips are more than $2 from Quicko or KSGER store.

                              Comment

                              • stj
                                stj
                                Great Sage 齊天大聖
                                • Dec 2009
                                • 29505
                                • some shithole run by Israeli agents

                                #16
                                Re: KSGER Battery BMS charge battery board review

                                Originally posted by redwire View Post
                                It sounds like a bad connection inside the tip/heater that goes away once it is hot. Like a dud (contaminated) spotweld/crimp inside..
                                unlikely, the heater and thermocouple are in series - the connection is welded.

                                Comment

                                • redwire
                                  Badcaps Veteran
                                  • Dec 2010
                                  • 3413
                                  • Canada

                                  #17
                                  Re: KSGER Battery BMS charge battery board review

                                  OP gets bad thermocouple readings yet can drive power through the T12 heater, and the two are in series.
                                  What kind of connection is an open but not an open? This is what makes it confusing.

                                  A thin layer of oxide and crud can rectify (i.e. audio connections that sound distorted) at low currents but higher currents seem to punch through. I see connections that are bad at low currents and voltages, but work fine at high current.
                                  I think this is what he is seeing. Or he has the tip with extra thermocouple inside (four wires pic, might be JBC) instead of the one spot weld forming the thermocouple junction at the tip.
                                  The T12 tip collars seem to be different quality, the crimps seem to be another place for bad connections.
                                  Attached Files
                                  Last edited by redwire; 06-20-2019, 01:28 PM.

                                  Comment

                                  • sam_sam_sam
                                    Badcaps Veteran
                                    • Jul 2011
                                    • 4679
                                    • USA

                                    #18
                                    Re: KSGER Battery BMS charge battery board review

                                    I would like to point out that I knew that they were nock offs and I get $2.00 worth of use out of them I will be happy I want to try out different styles of tips and see which tip I want really spend the money on
                                    9 PC LCD Monitor
                                    6 LCD Flat Screen TV
                                    30 Desk Top Switching Power Supply
                                    10 Battery Charger Switching Power Supply for Power Tool
                                    6 18v Lithium Battery Power Boards for Tool Battery Packs
                                    1 XBox 360 Switching Power Supply and M Board
                                    25 Servo Drives 220/460 3 Phase
                                    6 De-soldering Station Switching Power Supply 1 Power Supply
                                    1 Dell Mother Board
                                    15 Computer Power Supply
                                    1 HP Printer Supply & Control Board * lighting finished it *


                                    These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

                                    1 Over Head Crane Current Sensing Board ( VFD Failure Five Years Later )
                                    2 Hem Saw Computer Stack Board

                                    All of these had CAPs POOF
                                    All of the mosfet that are taken out by bad caps

                                    Comment

                                    • sam_sam_sam
                                      Badcaps Veteran
                                      • Jul 2011
                                      • 4679
                                      • USA

                                      #19
                                      Re: KSGER Battery BMS charge battery board review

                                      Originally posted by redwire View Post
                                      OP gets bad thermocouple readings yet can drive power through the T12 heater, and the two are in series.
                                      What kind of connection is an open but not an open? This is what makes it confusing.
                                      Yeah I am little confused by this myself that once you heat them up to 300c they work fine I was and still a little confused by this
                                      9 PC LCD Monitor
                                      6 LCD Flat Screen TV
                                      30 Desk Top Switching Power Supply
                                      10 Battery Charger Switching Power Supply for Power Tool
                                      6 18v Lithium Battery Power Boards for Tool Battery Packs
                                      1 XBox 360 Switching Power Supply and M Board
                                      25 Servo Drives 220/460 3 Phase
                                      6 De-soldering Station Switching Power Supply 1 Power Supply
                                      1 Dell Mother Board
                                      15 Computer Power Supply
                                      1 HP Printer Supply & Control Board * lighting finished it *


                                      These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

                                      1 Over Head Crane Current Sensing Board ( VFD Failure Five Years Later )
                                      2 Hem Saw Computer Stack Board

                                      All of these had CAPs POOF
                                      All of the mosfet that are taken out by bad caps

                                      Comment

                                      • stj
                                        stj
                                        Great Sage 齊天大聖
                                        • Dec 2009
                                        • 29505
                                        • some shithole run by Israeli agents

                                        #20
                                        Re: KSGER Battery BMS charge battery board review

                                        maybe the heater/sensor are fine.
                                        maybe there is a leak to ground that is enough to suppress a handfull of mV but not the 24v drive.
                                        these tips should not read anything between ground and the active contacts.

                                        Comment

                                        Working...
                                        X