Need software for Intelligent universal programmer lk48

[electronicsurplus]

Re: Need software for Intelligent universal programmer lk48

I have the entire CD

I will try to attach here

This is from Original LK-48 Intelligent Universal Programmer

Exactly the same as pictured above

[stj]

Re: Need software for Intelligent universal programmer lk48

i doubt there is anything on it that cant be downloaded from Advantech

[diif]

Re: Need software for Intelligent universal programmer lk48

You could upload it to something like Dropbox or Google drive then share the link.

[stj]

Re: Need software for Intelligent universal programmer lk48

you probably cant - it depends on the size - and it must be in a zip.
20meg is the size limit i think.

[electronicsurplus]

Re: Need software for Intelligent universal programmer lk48

I am trying to upload entire CD

Please someone let me know how to do this

Thanks

[electronicsurplus]

Re: Need software for Intelligent universal programmer lk48

I bought an universal programmer but I cannot find the software.It comes out in different names (Dataman 48uxp ,Labtool 48uxp etc).Maybe someone can help me find it .
The device looks like this

Thanks in advance,

Here is the complete software CD received when buying the original unit attached

[megaraider]

Re: Need software for Intelligent universal programmer lk48

You can select on labtool "K9F1208U0B-TS48" = NAND512W3A2SN6E, works well.

Thanks for mentioning this up

Thanks stj
Magic really happens
.

Recent software version does support some few NAND flash IC's.
.

[kamaku]

Re: Need software for Intelligent universal programmer lk48

Yes it recognizes the programmer but stays in demo mode due to license.
Can you please help me 'fixing' this issue?

Firmware Version: 3.10
It really stinks not supporting NAND flash.
Do you know any cheap solution? Really need support for those.
I'm desperate to get my hands on a 512Mbit (NAND512W3A2SN6).
.

You can select on labtool "K9F1208U0B-TS48" = NAND512W3A2SN6E, works well.

[stj]

Re: Need software for Intelligent universal programmer lk48

driver is built into the UXP software.

[ducky29]

Re: Need software for Intelligent universal programmer lk48

with the programmer on, and a tested usb cable, does windows find *anything* ??
if yes - what is the VID & PID

and did you test it with the parallel cable?

When I connect the programmer, I go through "Find New hardware Wizard"- I pick Install the software automatically" then I get an error : Cannot install this Hardware.
I haven't tested it in parallel port cuz I dont have a cable.

USB\Vid_0574&Pid_ea80&Rev_0001

Thank you!

[stj]

Re: Need software for Intelligent universal programmer lk48

with the programmer on, and a tested usb cable, does windows find *anything* ??
if yes - what is the VID & PID

and did you test it with the parallel cable?

[ducky29]

Re: Need software for Intelligent universal programmer lk48

usb?

Ya. Also tried it on different slots. Still dosent recognize the programmer.

[stj]

Re: Need software for Intelligent universal programmer lk48

usb?

[ducky29]

Re: Need software for Intelligent universal programmer lk48

what drivers?

XP dosent recognize the hardware when I connect the programmer.

[stj]

Re: Need software for Intelligent universal programmer lk48

what drivers?

[ducky29]

Re: Need software for Intelligent universal programmer lk48

XP dosent automaticlly install the drivers. Can some help with them?
XP 32 bit.

[megaraider]

Re: Need software for Intelligent universal programmer lk48

pm'd

Thanks stj
Magic really happens
.

[stj]

Re: Need software for Intelligent universal programmer lk48

pm'd

[megaraider]

Re: Need software for Intelligent universal programmer lk48

newer versions DO work with the parallel port if you have the driver for the port.
if you can get the 48XP soft to recognise the programmer, i can help with the license.
i'm attaching a seperate driver.

btw, the hardware cant support NAND no matter what software version you have.
what eprom version is in yours? i have 3.10

Yes it recognizes the programmer but stays in demo mode due to license.
Can you please help me 'fixing' this issue?

Firmware Version: 3.10
It really stinks not supporting NAND flash.
Do you know any cheap solution? Really need support for those.
I'm desperate to get my hands on a 512Mbit (NAND512W3A2SN6).
.

[stj]

Re: Need software for Intelligent universal programmer lk48

btw, when i say XP, i dont mean the operating system - i mean 48XP software