Need software for Intelligent universal programmer lk48

[stj]

Re: Need software for Intelligent universal programmer lk48

driver is built into the UXP software.

[kamaku]

Re: Need software for Intelligent universal programmer lk48

Yes it recognizes the programmer but stays in demo mode due to license.
Can you please help me 'fixing' this issue?

Firmware Version: 3.10
It really stinks not supporting NAND flash.
Do you know any cheap solution? Really need support for those.
I'm desperate to get my hands on a 512Mbit (NAND512W3A2SN6).
.

You can select on labtool "K9F1208U0B-TS48" = NAND512W3A2SN6E, works well.

[megaraider]

Re: Need software for Intelligent universal programmer lk48

You can select on labtool "K9F1208U0B-TS48" = NAND512W3A2SN6E, works well.

Thanks for mentioning this up

Thanks stj
Magic really happens
.

Recent software version does support some few NAND flash IC's.
.

[electronicsurplus]

Re: Need software for Intelligent universal programmer lk48

I bought an universal programmer but I cannot find the software.It comes out in different names (Dataman 48uxp ,Labtool 48uxp etc).Maybe someone can help me find it .
The device looks like this

Thanks in advance,

Here is the complete software CD received when buying the original unit attached

[electronicsurplus]

Re: Need software for Intelligent universal programmer lk48

I am trying to upload entire CD

Please someone let me know how to do this

Thanks

[stj]

Re: Need software for Intelligent universal programmer lk48

you probably cant - it depends on the size - and it must be in a zip.
20meg is the size limit i think.

[diif]

Re: Need software for Intelligent universal programmer lk48

You could upload it to something like Dropbox or Google drive then share the link.

[stj]

Re: Need software for Intelligent universal programmer lk48

i doubt there is anything on it that cant be downloaded from Advantech

[electronicsurplus]

Re: Need software for Intelligent universal programmer lk48

I have the entire CD

I will try to attach here

This is from Original LK-48 Intelligent Universal Programmer

Exactly the same as pictured above

[electronicsurplus]

Re: Need software for Intelligent universal programmer lk48

I have the entire CD

I will try to attach here

This is from Original LK-48 Intelligent Universal Programmer

Exactly the same as pictured above

If it does not attach let me know and I can upload somewhere if needed

[stj]

Re: Need software for Intelligent universal programmer lk48

list the content of the cd.

[aevette]

Re: Need software for Intelligent universal programmer lk48

Hi stj,

read your post on the labtool48xp, i bought an old 48xp, thinking i could use it but the software license has expired. :-(

can you send me the file for updating the license, my email is k_mooi@yahoo.com.sg

any help will be much appreciated. thanks in advance.

[Daniel-fred]

Re: Need software for Intelligent universal programmer lk48

Programmer Labtool48XP (bought in Sweden many years ago)
Firmware Version: 3.10
Parallel port interface to computer (Windows XP on old computer)

It works at the moment with old software LT48UXP_83203

Is it possible to use latest software LT48UXP_1130?
and find / make a file to update the license to aktivate the software?

/Daniel

[GusiLuz]

Re: Need software for Intelligent universal programmer lk48

Programmer: Promax PR-875B (spanish rebranded Dataman-48XP)
Firmware version: 3.10
Parallel port interface

I have Promax and LabTool old free software version, running in an old Windows XP laptop, with physical ECP parallel port.

As in the previous post: any way to overcome 'Demo version problem' with latest software version, for last Atmel ATMega support?

Thanks!

[hbest]

Re: Need software for Intelligent universal programmer lk48

hello , I bought an universal programmer Lab Tool-48 but I find a problem when i connect to PC with a parallel port , i used a lot of software with xp or win7(32bit) and also win 98 but the same problem lab-48 not found in the software .
any help will be much appreciated. thanks in advance.

[megaraider]

Re: Need software for Intelligent universal programmer lk48

hello , I bought an universal programmer Lab Tool-48 but I find a problem when i connect to PC with a parallel port , i used a lot of software with xp or win7(32bit) and also win 98 but the same problem lab-48 not found in the software .
any help will be much appreciated. thanks in advance.

Used i guess... are you sure it was working?

In BIOS settings try changing the LPT port mode to EPP or ECP.
Also make sure LPT1 is set to port 0x378.
Make sure you're using a full EPP wired cable.

Ensure you're using the LPT port software version 'WLT48XP' [not the USB version (WLT48UXP)]!

[hbest]

Re: Need software for Intelligent universal programmer lk48

Used i guess... are you sure it was working?

In BIOS settings try changing the LPT port mode to EPP or ECP.
Also make sure LPT1 is set to port 0x378.
Make sure you're using a full EPP wired cable.

Ensure you're using the LPT port software version 'WLT48XP' [not the USB version (WLT48UXP)]!

thank your megaraider for your help ,

i try to change the port mode but in the software i used LT48UXP_83203 , can your give me the right soft and thanks.

[stj]

Re: Need software for Intelligent universal programmer lk48

Labtool 48 is NOT Labtool 48xp,
it's much older.
the last software release was dated 2003.

[hbest]

Re: Need software for Intelligent universal programmer lk48

Labtool 48 is NOT Labtool 48xp,
it's much older.
the last software release was dated 2003.

can you give the right soft and thank you .

[stj]

Re: Need software for Intelligent universal programmer lk48

you need to search it or contact advantech
http://www.aec.com.tw/contactus.htm