Any opinions on either this ESR meter kit website?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • xelectech
    retired tech
    • Nov 2014
    • 238
    • USA

    #1

    Any opinions on either this ESR meter kit website?

    I'm finally almost ready to get an esr meter, decided on a kit so I can get some extra familiarity with it, here's what I'm considering:

    http://electronics-diy.com/store.php...&sub=esr_meter

    Any comments yea or neigh, any one done business with the website?

    Thanks in advance for any help,

    Mike
  • stj
    Great Sage 齊天大聖
    • Dec 2009
    • 31002
    • Albion

    #2
    Re: Any opinions on either this ESR meter kit website?

    $40 for a first generation esr meter in bits vs $15 for a second gen graphic version built?
    that 1st gen unit will be almost useless with the newer software.

    if you really want to build one, look at this.
    http://www.ebay.com/itm/221952423890
    2nd gen design with graphic display and rotary encoder.

    Comment

    • xelectech
      retired tech
      • Nov 2014
      • 238
      • USA

      #3
      Re: Any opinions on either this ESR meter kit website?

      Hmm, that looks pretty tempting, except I've never bought anything over the web with a CC;
      After reading about their version, I was going to ask 'em about using a gift card or prepaid debit card, but found that I'd have to register, plus enable javascript to use that function, which is something I generally avoid doing.

      In their description they say,

      "Capacitance measurement range from 25pf to 100mF (10 万 UF)" ,

      do you happen to know whether they actually mean 'milli-' or 'micro-' farad? that chinese-looking character in parentheses kinda throws me. I'm also wondering what they mean by the phrase 'European resistance', I'd look at the detailed instructions except I'd have to register to do that as well.

      Anyway, thanks for pointing out that newer model, now I have some questions I need to ask the DIY-place.
      Last edited by xelectech; 01-09-2016, 09:28 AM.

      Comment

      • SteveNielsen
        Retired Tech
        • Jun 2012
        • 2327
        • USA

        #4
        Re: Any opinions on either this ESR meter kit website?

        There are other sources for the equivalent device and I'm surprised STJ didn't point you to his thread on upgrading one of these:
        http://www.aliexpress.com/item/2015-...355885481.html

        Oh yeah, if I am not mistaken that "mF" is actually millifarads cuz I know them suckers don't stop at 100 uF.
        Last edited by SteveNielsen; 01-09-2016, 09:49 AM.

        Comment

        • xelectech
          retired tech
          • Nov 2014
          • 238
          • USA

          #5
          Re: Any opinions on either this ESR meter kit website?

          Thanks for your reply. I've been following the ESR upgrade thread, this talk of 'software'
          kinda spooks me a little bit. I guess I'll try to see if I can use a prepaid debit card with alibaba (without enabling javascript). I don't hold much hope for that, though...it's hard being a luddite sometimes.

          Comment

          • SteveNielsen
            Retired Tech
            • Jun 2012
            • 2327
            • USA

            #6
            Re: Any opinions on either this ESR meter kit website?

            You don't have to do the upgrade stuff, the tester works great as is.

            Comment

            • xelectech
              retired tech
              • Nov 2014
              • 238
              • USA

              #7
              Re: Any opinions on either this ESR meter kit website?

              Cool - I'm looking forward to finally having a way to test for esr, plus the other functions the meter is capable of doing. Also have a growing collection of replaced capacitors, some bulging, some not...

              Comment

              Related Topics

              Collapse

              • chth96
                Is it possible to test small ceramic disc capacitor with analogue meter?
                by chth96
                I read EBOOK of Testing Electronic Component and found that

                "In order to test the small blue resin coated ceramic disk capacitor which has 104 50v specification,it is possible to test this small ceramic capacitor by making use of analogue meter.
                Set to times 10Kohm that has 12v output from the probe to check disorder of ceramic capacitor.
                It is not uncommon that testing result of digital capacitance meter is okay,But It show shorted reading when you check it with analogue meter."

                Is it really possible to test small ceramic disc capacitor with analogue...
                03-09-2024, 10:03 PM
              • sam_sam_sam
                Modification of a Fluke multi meter that uses three AA batteries to use a 14500 lithium ion battery
                by sam_sam_sam
                I have had with regular AA batteries that leak this meter is expensive new I already replaced the battery battery clips once and the same thing happened again and I am tried of so it is getting modified to accommodate lithium ion batteries that are the same size excluding the positive terminal and removing the battery clips I will have enough room for the BMS protection board

                I going to put 3 lithium ion battery in parallel with the BMS protection board and a way to charge the battery externally and heat shrink the battery pack and use a JST connector so I easily remove the battery...
                12-31-2023, 06:04 AM
              • jorpec
                Changing the scale of an analog meter
                by jorpec
                Hi

                I want to change the scale of an analog meter, to monitor the charge of an li-ion single cell, so the needle at the end would point 4.2 volts and the 0 on the meter would point 2.5 volts or so, i tried to add diodes or a zener in series with the meter but the changes of the ambient temperature also changes the voltage value on the meter
                I wonder how i can accomplish this so the meter would be precise at any temperature ?

                Thnaks
                01-23-2023, 10:37 AM
              • sam_sam_sam
                How an incandescent light and a ESR meter ** friend**have a machine blowing fuses
                by sam_sam_sam
                About a month ago we had a transformer jumper wire that burned in two different places between two transformers caused over $200 thousand dollars worth of damage to VFD drives at least 10 of them and a memory card and quite a few power supply as well

                Now we have most of the equipment that got damaged back up and running except a feeder that has issues and we are waiting for some parts for

                Now we also have another piece of equipment that was blowing fuses on the 110 volt controller switch circuit with the “E” stops and one switching power (24 volt) supply and a transformer...
                12-14-2023, 07:45 PM
              • Stephan Mathers
                EDMI ATLAS MK10 Electronic Meter Discussion
                by Stephan Mathers
                Greetings, new guy here but always interested in the crazy universe of modding

                We just finished construction of around 25 vacation houses, all inside the same private area.
                Each house has 3phase power , and we bought an atlas MK10 meter for each house (25 meters total ! )

                The metering on a per-house basis is done privately. Its not done by a utility company. The utility company will only charge us for the total consumption of all 25 houses together.

                Id like to do a small modification on the firmware of our MK10 to make it easier identify each house's...
                05-20-2025, 09:09 AM
              • Loading...
              • No more items.
              Working...