Announcement

Collapse

Forum Rules *ALL NEW MEMBERS, PLEASE READ!! UPDATED!!*

First and foremost, Welcome to the Badcaps Capacitor Search Engine & Forums!

New members that have activated their accounts have limited access to certain features of the site until established. Members with zero posts have no access to the private messaging system. Also, members with zero posts may not edit certain profile attributes, such as signatures. New members also may not create new threads. However, new members with zero posts have full access to all technical information contained on this forum, and that also includes attachments (images and files that other members have uploaded), and new members that have activated their accounts are free to post replies to existing threads. If you wish to create a new thread, the fix is simple! All you need is ONE post to be able to have full unrestricted access, and that can be simply posting an introduction of yourself or say hello in THIS THREAD. This may seem a little strange, but it helps keep spam and abuse curved. Please note, that it may take up to one hour from your first post for the limits to be removed. If you make a post and don't immediately see the restrictions gone, be patient. The promotion system updates every hour.

Please complete your profile after making your first post, with your name, locale, and other info. It's nice to know members on a first name basis, and know where they're from. Makes for a much friendlier environment!

Posting rules for this forum will be STRICTLY enforced by myself as the owner/administrator, and my moderator crew.

Badcaps.net IS A BUSINESS!!! If you are a servicer, service center, or vendor of any kind in the computer/capacitor industry, you are NOT permitted to advertise, link, promote, or plug your business on this forum in ANY way! NO EXCEPTIONS!! This includes asking for "donations" in exchange for BIOS passwords or tech advice for anything! If I see you doing that, your post will be edited or deleted, and you warned. If it happens again, you will be banned. The only exceptions are the references to the companies quoted in the FAQ which the administration have added for the convenience of those around the world who have difficulty to source caps for their repair.

This also includes using this forum's private message system to solicit business. Members, if you receive a PM from anyone offering repair services or components, please alert me immediately! Myself or any of my moderators, will never private message a user soliciting business, for Badcaps.net, or any other servicer/vendor. If you PM me about repairing your device, I will reply and take care of you, however, I will not message you first.

------------------------------------

Posting rules:

This forum was created to be a technical support forum primarily for the do-it-yourselfers who choose to repair their own boards. Any and all technical questions are welcome!

1) Please use the SEARCH feature!! Your question may have been answered in another thread! Please search first and see if it has!

2) When posting a technical question, be as detailed as possible in your thread. The more information we have about your specific problem, the better we can answer your question.

3) Please use COMPLETE sentences, punctuation, and grammar! Nobody is perfect, hence, a spelling error on occasion is no biggie. However, posts/threads that are unreadable will be deleted. This includes any and all forms of 'ebonics', leet, chatroom jargon, and 'text message' shorthand and slang. This forum is not a chatroom/text message, please use full words and complete sentences.

4) Keep discussion on topic!! DO NOT HIJACK THREADS! It's easy to do (I've done it myself a few times...) Lets try to keep it down to a minimal!! If you have something really off topic, that's what the lounge is for!

5) Keep things civil! There will be no tolerance for flaming, bashing, hateful remarks, racial remarks, adult material of ANY kind, and so on.

6) THE LOUNGE RULES! The lounge is a place for off topic chit-chat! If you post something that might be considered questionable or something you don't want kids to see, or something you can't view at work/school, etc, please label that thread *NWS* or NOT WORK SAFE in the thread title as a warning. The Lounge is NOT moderated, anything is welcome... Feel free to post rants, jokes, cars, hot women (remember the NWS warning in the title), or just about anything within reason. It's an open forum! Please refrain from participating in political topics if you have thin skin, they can get heated sometimes!! Remember that we have members here from all over the world, with many different views and cultures. Political debates can turn really ugly, and really fast, and if they degrade to personal attacks and useless banter/bashing, moderator action will ensue. I want this forum to be a safe haven for technical discussions from all walks of life, so lets keep off topic discussions civil and friendly.

7) Spamming and spammers will NOT be tolerated or accepted in any way, shape, or form! Spam bots are instantly and permanently banned, and their threads deleted! The mod crew is really quick to zap spammers, we typically pop them before they even get to post. This also includes regular members as well. be courteous and not post spam. This includes links to off-site information that's not relevant to the thread at hand. Do not plug other websites, forums, or businesses in your signatures. You may do so in a thread if the off-site link you're posting is relevant to the topic, but otherwise, don't do it. If you see a thread which clearly a spam bot posting that we have not removed yet, DO NOT click any links in it!! Simply click the 'report bad post' button, and it'll be taken care of, usually within minutes.

8) Account removals & closures: Since no personal information is given in the creation of your Badcaps.net Forum account, requests to remove and/or delete accounts will be declined. Any requests for removal of threads & posts you created will also be declined. The reason is the missing posts can/will leave threads incomplete and fragmented. For the threads to be of help to others later on, information can't and won't be missing. However, if you inadvertently posted personal identifiable information in a post (such as an email address, real name, or phone number), please contact a staff member. In those cases, the post may be edited or removed, at the staff members discretion.

That's about it for the rules, the setup here is pretty loose. However, if you're caught violating any of the rules above, here's what will happen:

First offense: Warning by me or a moderator
Second offense: Banning for 1 day
Third offense: Banning for 3 days
Fourth offense: Banned permanently.

If you do something really dumb, or are just a troll, I will skip the warning and the temporary banning, and ban you permanently!

The rules are pretty cut and dry... However, if you have any questions about this policy, feel free to contact me.
See more
See less

ESR meter upgrades

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Re: ESR meter upgrades

    I posted my message above also on eevblog, madires replied with:
    Originally posted by madires
    The HEX and EEP files are the firmware in Intel encoded format, not any direct binary image.
    My reply:
    Aww thanks!
    When I open the firmware file for the flash my programmer asks if it should be in Intel encoded format which I answer yes to.
    Next for the EEPROM "data" window I simply used drag and drop.
    It does not ask then about the format so I assumed it uses the same as for the flash.
    Well turns out that is not what happens at all!
    The files I've tested are named TransistorTester.hex for the flash and TransistorTester.eep for the EEPROM.
    Well turns out if I rename the TransistorTester.eep to "Something.hex" it also does not ask about encoding format.
    But it does then convert it to Intel encoded format!

    And now while testing it some more to get some screenshots it always converts even the eep file to Intel hex without asking!
    Murpy's law!!!

    Originally posted by stj View Post
    just looked at the programmer foto's

    tick "erase" and "blank-check"
    otherwise the eeprom could have crap left in it written by older firmwares.
    I do a manual erase, then power off and on, then blank check, then write each time I program the chip.
    "The one who says it cannot be done should never interrupt the one who is doing it."

    Comment


      Re: ESR meter upgrades

      this is why i recomend using AVRdude

      Comment


        Re: ESR meter upgrades

        Ok, so I've gone back and tested all firmwares again after realizing this annoying culprit with my programmer!
        All of the firmwares that I wrote "Only backlight" on they don't work, probably wrong LCD type and parallel communication with it instead of serial.

        But all of the ones where I wrote that they had "one line of scrolling characters" or the same but a "BOLD scrolling line" instead were caused by this issue!
        So all of those firmwares are actually working fine:
        GM328A ESR tester (SVN663).zip
        testing-ramshift.zip
        testing-chips.zip > 8MHz-7565
        testing-x1.zip
        testing-tuning3.zip

        Works but upside down & inverted:
        mega328_st7565
        testing-almost.zip
        testing-bg-kit.zip
        "The one who says it cannot be done should never interrupt the one who is doing it."

        Comment


          Re: ESR meter upgrades

          so, the final-test ones i just posted?

          Comment


            Re: ESR meter upgrades

            Ok, I retested them now.
            "testing-final-test.zip"
            Both the "8MHz(+eeprom)" & "8MHz(no-eeprom)" gives the same results.

            1uF film capacitor
            Before cal: 964nF 0.02ESR
            After cal: 974uF 0.01ESR
            Bob Parker MKII ESR meter: 1.2ESR
            I'm honestly not sure what it's actual ESR is though.

            Still got the ugly font though, would be nice with the previous bold one
            "The one who says it cannot be done should never interrupt the one who is doing it."

            Comment


              Re: ESR meter upgrades

              Attached Files

              Comment


                Re: ESR meter upgrades

                once you realise the big-ass fonts are a bad idea when you need lots of onfo on the screen,
                you can flash it with the correct one.
                Attached Files

                Comment


                  Re: ESR meter upgrades

                  sorry only just got back to this thread, so stj if i use the above firmware with small fonts is fine for me, does the esr read ok in this version as thats mainly what i use these testers for many thanks

                  Comment


                    Re: ESR meter upgrades

                    it will work fine if your chip is good.

                    you need to talk to mr Hansson about your programmer settings, because it looks like your problems are down to settings!
                    you should have used the USBasp & fitted the header!

                    16MHz build also tests crystals and resonators upto about 10MHz btw.
                    Last edited by stj; 07-18-2016, 01:58 AM.

                    Comment


                      Re: ESR meter upgrades

                      Have you got the zip for the 16 mhz one please? and yes if per hansson dosnt mind letting us know what the issue was with his programmer that will be great (i have read most of the posts im sure he mentioned something about re naming them although i didnot do that with mine) stj i will upgrade it still with the header and use the usbasp but programming through avrdude etc is one thing i need to read up on a learn but i will add the header and the crystal ready thanks again stj and per hannson i wish i had more time to test some of your test firmware myself but have been so busy with job searching and interviews etc.
                      Last edited by vinceroger69; 07-18-2016, 02:21 AM.

                      Comment


                        Re: ESR meter upgrades

                        combined in the zips posted.

                        Comment


                          Re: ESR meter upgrades

                          Thankyou.

                          Comment


                            Re: ESR meter upgrades

                            vinceroger69: In post #453 I posted a picture linked again here.
                            That shows the TransistorTester.eep file added incorrectly, in binary format instead of Intel HEX.
                            You can see it because the ASCII code window shows the same code as if you open the file directly in Notepad: I.e. it has not been converted to Intel HEX.
                            As I don't have your programmer I can't give direct advice, but if you want I can connect via Teamviewer or your choice of software, just send me a PM and I'll have a look...
                            "The one who says it cannot be done should never interrupt the one who is doing it."

                            Comment


                              Re: ESR meter upgrades

                              Originally posted by Per Hansson View Post
                              vinceroger69: In post #453 I posted a picture linked again here.
                              That shows the TransistorTester.eep file added incorrectly, in binary format instead of Intel HEX.
                              You can see it because the ASCII code window shows the same code as if you open the file directly in Notepad: I.e. it has not been converted to Intel HEX.
                              As I don't have your programmer I can't give direct advice, but if you want I can connect via Teamviewer or your choice of software, just send me a PM and I'll have a look...
                              Thanks per hansson i will have a go with programming with the latest firmware later today and see how i get on any issues i will get back to you many thanks again.
                              I have just ordered two spare ics just incase ones needed etc, have you upgraded yours to 16mhz? or are you keeping yours at 8

                              Comment


                                Re: ESR meter upgrades

                                it's a handy upgrade,

                                i had a board the other month, nicad battery had leaked on a crystal and eaten the surface.
                                i thought i was fucked, but put it in the tester and it said "4,000KHz" yay - just need to find a 4MHz crystal in the scrap to fix the board - i already sorted the other damage.

                                Comment


                                  Re: ESR meter upgrades

                                  i will certainly upgrade this 2016 tester to 16mhz as have the crystals then i will work on my first tester the one i need to change the smd atmega on and too add the 16 mhz crystal and caps (stj im sure i read you said solder one leg of the capacitor to the crystal leg the other too the crstal can? is that rite) if not i need to find a ground for the caps.

                                  Comment


                                    Re: ESR meter upgrades

                                    if you have smd caps, then yes - between the legs and can - and earth the can.

                                    if not then just go to the nearest earth point.

                                    Comment


                                      Re: ESR meter upgrades

                                      I have normal caps i will find a earth point then thanks

                                      Comment


                                        Re: ESR meter upgrades

                                        Now I have tested the 8MHz build from "GM328x ESR tester (SVN684).zip" that stj posted above.
                                        As I wrote back in post #446 I have realized my ZIF socket is really poor.
                                        The seller has already promised to send a new one. (It for example does not open all the way!).
                                        I did some more tests and after calibration and using my 1uF film capacitor:
                                        I get 0.09 ESR in the top left slot of the ZIF socket.
                                        In the top right I get 0.17 ESR
                                        Lower left I get 0.13 ESR
                                        Lower right I get 0.16 ESR
                                        These differences where one cause for my unstable readings: I didn't always use the same port for calibration...
                                        So using the calibrated top left slot I now get:
                                        Sanyo SEPC 4v 820uF: 0.05 ESR
                                        5.6Ω resistor: 5.70Ω
                                        68Ω resistor: 67.9Ω
                                        So quite good

                                        Originally posted by stj View Post
                                        once you realise the big-ass fonts are a bad idea when you need lots of onfo on the screen, you can flash it with the correct one.
                                        I understand what you say, but for example in this post I showed the bold font testing an, as you put it:
                                        "fet or a transistor with reverse-diode in it and see how much text it has to display!"
                                        Well the small font is the same, it also has to scroll through three pages to show all the info so it does not seem better to me?

                                        Originally posted by vinceroger69 View Post
                                        have you upgraded yours to 16mhz? or are you keeping yours at 8
                                        No, I don't have a 16MHz crystal, I will order that and a 20MHz one.
                                        Plus some more stuff to hotrod the meter a bit

                                        Also following on with my posts above about the programming issue, I posted a video on Youtube showing the issue clearly.
                                        I also attached the video to this post if you prefer it, in much better quality but compressed to less than 3MB in size
                                        Attached Files
                                        "The one who says it cannot be done should never interrupt the one who is doing it."

                                        Comment


                                          Re: ESR meter upgrades

                                          the smaller font gives more characters across, to stop linewrap, it wont help with the number of lines

                                          it also uses a lot less memory,not so important at 8MHz, but at 16MHz with the crystal-testing enabled we are at 98% full!!
                                          and that's with the calibration using short instructions.
                                          using the full instructions like on the 8MHz build took it over 101%.

                                          Comment

                                          Working...
                                          X