Try our *UPDATED* boardview, bios, & schematic search. Over 2.3 million files for download!

zm-r5830 profiles and backups

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Octavian994
    New Member
    • Jul 2022
    • 9
    • Moldova

    #1

    zm-r5830 profiles and backups

    Hi, I recently restored the BGA rework machine zm-r5830, now profiles are missing, can someone help me with best profiles for soldering cpu, gpu, memory, etc.etc Thanks
  • Octavian994
    New Member
    • Jul 2022
    • 9
    • Moldova

    #2
    Does someone have backup for this machine zm-r5830, i installed backup found on internet but i guess is not for her, i got errors.
    Attached Files

    Premium supporters get full download access and other benefits.

    Comment

    Related Topics

    Collapse

    • Boardview and Schematic Bot
      ALIENWARE Steam Machine R2 i7-6700T Specification for Upgrade or Repair
      by Boardview and Schematic Bot
      This specification for the ALIENWARE Steam Machine R2 can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Steam Machine R2 boardview and Steam Machine R2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
      09-12-2024, 03:28 PM
    • double_DD
      Illy Y5 coffee machine - touch buttons broken and need repair
      by double_DD
      Hi all,

      First and foremost, I'd like to wish everyone here a happy and successful new 2026!

      Now, let's dive into my current issue. Once again I'm stuck and would like some advices from someone smarter than me.

      I have this coffee machine, Illy Y5, that has a glass top with fancy touch controls. Something was wrong with it, and in the process of multiple openings and closings I managed to break the ribbon connecting the buttons to the circuit board. And as luck usually goes, this happened just a few days after we ordered a new batch of capsules for it. :/...
      01-07-2026, 06:59 AM
    • CG2
      Janome DC3050 Sewing Machine Pedal Resistance
      by CG2
      OK, this is a long shot. I got this sewing machine cheap because it's end of line, ex-display, and had no pedal. The genuine pedal costs £60, while Ebay knock-offs go for around £15. So I went for the knock-off, it doesn't work, and I'm not sure whether it's the pedal or the sewing machine that has the problem.

      Now this is an electronic machine, unlike the old fashioned sort where the pedal was a big resistor in series with the power to the motor. Here, the pedal is just (I think) a variable resistor fed with a 5 volt supply, and limited to a current of 5 milliamps. Assuming that...
      04-14-2023, 07:53 AM
    • rigeback
      BEKO washing machine
      by rigeback
      Hey Guys,
      Got this washing machine giving problems, at first there was no display so removed the control board and found one of the Caps had fallen of the board, soldered it back and noticed there was another also missing.
      Anyway there is this Green thermoresistor which is supposed .33 Holms, when measuring 220Von one side and the other 0 Volts, has this resistor blown or does it have a activator?
      I was thinking of using a normal thermo resistor to see if I get power to the control voltage, not sure though....
      10-07-2026, 08:22 AM
    • Soulzink
      Samsug washing machine. Power supply DC41-00189a board issue
      by Soulzink
      Hi everyone,

      I am trying to fix a samsung washinmachine power supply main board.
      I already replaced it with another one to fix the machine but i want to try understand the issue with the old board.
      Therefore i hope to be able to get some help to explain what to check in order to troubleshoot.
      The power supply board reference is the following: DC41-00189a
      I have followed one thread (https://www.badcaps.net/forum/troubl...ingmachine-rel...
      04-19-2025, 06:26 AM
    • Loading...
    • No more items.
    Working...