Try our *UPDATED* boardview, bios, & schematic search. Over 2.3 million files for download!

SMD fuse soldering advice please

Collapse
X
 
  • Time
  • Show
Clear All
new posts
    Posted Photos 2 Photos

Related Topics

Collapse

  • lcdcaps1
    Quecoo T12-958 soldering iron tip not grounded
    by lcdcaps1
    Hi
    I have a Quecoo T12-958 soldering iron and have noticed the soldering iron tip is not grounded
    i dont want to use it like this
    I only found out because the chassis ground wire from the ground lug / bannana socket came off
    how can I ground the soldering iron tip

    What I thought of doing is soldering a wire from the ground leg on the soldering iron tip connector to the ground lug
    Would this be ok

    There is a earth wire from the PSU to control board but its not connected to anything.
    12-16-2025, 06:02 PM
  • kalemaroni
    Opinions on particular soldering iron tip maintenance product
    by kalemaroni
    Has anybody tested this product? Posting this question on a Facebook tech group I'm in got a few responses like "that kind of thing corrodes the tips" and "just using normal solder paste is much better" so I'm not looking for generic responses like that, but rather, does anybody know for certain whether this exact product is good or bad for soldering iron tips?

    ...
    04-12-2024, 03:52 AM
  • tony359
    Kaiweets USB soldering iron
    by tony359
    Hi all,

    I am testing a USB powered soldering iron. It's made by Kaiweets but I believe it's also sold under other names.

    As a standard test, I checked whether there was any voltage leak from the tip - that said the thing runs on USB-C power delivery so am I correct that the whole unit is floating and not grounded? If I check, I measure 90V at the tip but I have a feeling that that is not relevant? Maybe caused by that capacitor between primary and secondary inside the PSU? I do not see current flowing at all.

    In other words, do you think it's expected and...
    02-06-2024, 12:51 PM
  • corrize
    A funny fuse story – Lumix LX100 II
    by corrize
    Hello, I disassembled this dead camera, and found this WTF… Two fuses soldered one above the other !
    I was pretty sure nobody touched it before, but that can't be from factory. There is flux, and capacitor is probably missing.
    The other weird thing : the fuses are « G » fuse : (0.75A – 8V), seems very low. The original fuse should be « O » : (32V 2,5A).
    There is « O » mark beside. All fuses have the same mark letter on main board. So, I can deduce it's a « O » fuse.
    And this correspond to the issus I saw : when I plug the battery, I measure the voltage dropping...
    10-19-2023, 09:58 AM
  • Boardview and Schematic Bot
    Acer Chromebook Acer Chromebook Spin 713 CP713-3W - (Intel Core i3-1115G4, 8GB, 256GB SSD, 13.5 inch QHD 3:2 Touchscreen Display, Google Chrome OS, Iron) Chromebook Spin 713 Specification for Upgrade or Repair
    by Boardview and Schematic Bot
    This specification for the Acer Chromebook Acer Chromebook Spin 713 CP713-3W - (Intel Core i3-1115G4, 8GB, 256GB SSD, 13.5 inch QHD 3:2 Touchscreen Display, Google Chrome OS, Iron) Chromebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Acer Chromebook Spin 713 CP713-3W - (Intel Core i3-1115G4, 8GB, 256GB SSD, 13.5 inch QHD 3:2 Touchscreen Display, Google Chrome OS, Iron) boardview and Acer Chromebook Spin 713 CP713-3W - (Intel Core i3-1115G4, 8GB, 256GB SSD, 13.5 inch QHD 3:2 Touchscreen...
    09-07-2024, 03:10 AM
  • Loading...
  • No more items.
Working...