-
I have used 0.4 multiple times, and it worked for me, but it sits lower than the other chips -
GDDR5 memory chips, specifically in their 170-ball FBGA package, have ball leads with a diameter of 0.45mm. The package itself measures 12mm x 14mm.Leave a comment:
-
gddr5 ball lead?
gddr5 memory ball lead size?
0.4mm 0.45mm 0.5mm
-
Don't hesitate to tell me what i do wrong and if you have any tips and tricks, because i want to learn and improve.
I have a 60w iron that can go up to 450c, cone tip, i usually set it at 400. I applied flux on solder, tinning the tip then applying new lead solder to the joint so that it can mix with the lead free and lower the melting point, then i tried to suck up the melted solder with the solder sucker. But that didn't work since the lead solder doesn't seems to mix with the lead free one. I also tried applying flux to a wick and the board, then tinning the tip of the iron and... -
MSi GeForce GTX 1060 3GB OC GDDR5 Video Card MS-V328 Schematic
GTX1060 Rev 3.0... -
Hello,
has anyone use these Brands of solder balls? The brand BEST writes on the label of the jar the specs of the solder balls instead of the Mechanic brand. I beleive that BEST brand must be more professional (in labeling at least) but I have never try one of them so I would like your opinion. By the way I hardly can I find the Mechanic brand in aliexpress (the only where I found was lead free solder balls) and on ebay these that I found are approximately15USD per jar. If you know any other trusted brand of solder balls please tell me.06-22-2024, 11:06 AM -
https://www.ebay.com/itm/405035016711
I got this device yesterday and did some testing on some tabbing and some incandescent light bulbs and it seems to work very well from what I can tell but how do I know how accurate the m-ohms section is what can I use to verify it accurately I also tested some li-ion battery cells and this seems to be fairly accurate because I have another tester and they seem to agree with each other
I also checked some capacitors with it that were brand new and seem to show about what I expected to see with my blue capacitor tester so I think it... -
Just bought this amp for £10. Reverb pot acts like a volume pot on both high and low inputs and treble pot has high pitch whine when turned up above half way, but only on low input. Any help would welcomed....
Leave a comment: