Re: Not powering on starts led blinks 4 times then off
Hi sir thanks for the kind reply.
I checked PU3 boardview and what i discovered is pin19 CSIP is short with gnd i set multi-meter on continuity mode and set the black probe on gnd and with red probe i checked each leg and come to know that pin19 is conflicting with gnd buzzing.
Can that be the cause.
Originally posted by SMDFlea
View Post
I checked PU3 boardview and what i discovered is pin19 CSIP is short with gnd i set multi-meter on continuity mode and set the black probe on gnd and with red probe i checked each leg and come to know that pin19 is conflicting with gnd buzzing.
Can that be the cause.
Comment