Go Back   Badcaps Forums > Troubleshooting Hardware & Devices and Electronics Theory > Troubleshooting TVs and Video Sources
Register FAQ Calendar Search Today's Posts Mark Forums Read

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 07-08-2012, 02:54 PM   #1
New Member
Join Date: Jul 2012
City & State: Dalmeny Saskatchewan
My Country: Canada
I'm a: Knowledge Seeker
Posts: 2
Default Plasma new on on me

I have a Panasonic 42 Plasma pt # TH 42pz80U any how when i got it it looked good but it appeared to be that someone or somehow the aspect had been shrunk up to where on each side there is a 4 inch dark section the top and bottom are fine just the sides i cannot adjust that back and it affects the menu and anything else it is not the buffer boards i can remove the straps and it is different size and different looking in general I then thought it was the A board and looked it over couldn't see nor find any issue so i sent it in for repair thinking it must be it . It came back with a note nothing wrong with this board ??? Now what could it be the little control board that attaches to the buffers but like I said if i remove the affected leash area it looks very different . any ideas i could attach a picture but it looks normal aside from the two sides are blacked out about 4 to 5 inches ,
Hobbiest with some skills need to learn Lots also have a large colection of spare boards if anyone needs ask I may have
Captin21 is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump Technical Forums 2003 - 2018
Powered by vBulletin ®
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 12:51 AM.

Did you find this forum helpful?