Hello all,
this board is drawing 0.00 - 0.13a (jumping) with 20.3V
I assume all cd3215 are ok.
U6940 has 3.3v on pins 1,3,4 but 0.00 v on pin 10 (chgr_rst_in_r)
By the way L7600 is showing 0.03v,pp5v_g3s is missing.
U7000 was already treated (picture below)
Thank you in advance!
this board is drawing 0.00 - 0.13a (jumping) with 20.3V
I assume all cd3215 are ok.
U6940 has 3.3v on pins 1,3,4 but 0.00 v on pin 10 (chgr_rst_in_r)
By the way L7600 is showing 0.03v,pp5v_g3s is missing.
U7000 was already treated (picture below)
Thank you in advance!
Comment