I have a Samsung UN60F7100AFXZA it is just clicking and not turning on fully, the standby light blinks 5 times then the power relay clicks and starts the whole process over. I get steady 5VDC on pin 22(I believe to be the stby) on the cable that connects the logic board. the other pins match the board markings when I try to turn the tv on. the power relay carries 5V when closed on the small legs, the capacitors appear ok and read at or above rated capacitance except for the one circled on power board image, which will show as a short then 70microF. Not sure what the capacitor is cannot find any ratings on it.
Would appreciate any tips for narrowing down my problem with this tv
these are the boards in my TV
Power Board:
https://photos.app.goo.gl/jNsv6YnrHCD5H9cB8
Logic Board:
https://photos.app.goo.gl/XBhEraMx4jNfqtpz5
Small capacitor:
https://photos.app.goo.gl/ASCst1soSkiUWLPm8
Would appreciate any tips for narrowing down my problem with this tv
these are the boards in my TV
Power Board:
https://photos.app.goo.gl/jNsv6YnrHCD5H9cB8
Logic Board:
https://photos.app.goo.gl/XBhEraMx4jNfqtpz5
Small capacitor:
https://photos.app.goo.gl/ASCst1soSkiUWLPm8
Comment