LENOVO G50-70 Schematics needed

[ridamouh159]

aclu 1/aclu2 uma nm-a272
rev 1.0
05-12-2013

thanks in advance

[polytek]

i know it's diifucult to work without schematic, but i suggest to post good photo
of your borad both side and describe your problem, maybe our friends can help to resolve the problem, we can use datasheet of each Ic to check power or signal.

[ridamouh159]

the is the borther

[kotnatan]

Compal NM-A272 ACLU1 , ACLU2 UMA DDR3 REV 1.0 - Lenovo G40-70
http://****************/load/noutbuki/.../309-1-0-35932

[highpulse]

kotnatan , its not first time i try to solve your puzzles , but translation sucks big time ... what makes no sense to follow up to conplete registration. anyway of bypassing your method to make a normal registration , or inserting english as well ?
like this people could register on your site.

[highpulse]

i give you a example of the bad translation
its a diode bridge for AC DC transform

Qual opção para se referir às conclusões da figura correta?
1 AC; 2 plus, menos de 3, 4 mudanças
1 plus, 2 AC, AC 3-, 4- menos
Menos 1, 2 AC, 3-plus; 4 AC
1- variáveis ​​menos 2; 3; 4 AC mais

in english now ------ 1 ac ; 2 positive, mminus of 3 , 4 changes
1positive, 2 ac ,ac 3- , 4- negative
negative 1, 2 ac ,3-positive; 4ac

well im even not continue because its completely nonsense at all what the translations says , and i know perfectly if you have access to the image im speaking , that :

1 and 3 - AC
4 - positive
2 - negative.

so as you can see we do try to registed , but impossible to accomplish due to bad translations for we can carroy out completeting the test,

[tibd]

Here you go, the one from the above link. Know u asked for the G50-70, this one was for G40-70. Hope you get it on and running.

[cdwayne foremost]

great share bro

[quangtiendai]

n

[highpulse]

anyone with th e NM A271 ??

[bandulaelec]

Try This

[bpsorin]

Originally Posted by polytek

try this

Tnks!

[sdev]

please anyone hep g50 Schematics needed

LENOVO IDEAPAD G40-30 G50-30 SCHEMATIC - COMPAL ACLU9 ACLU0 NM-A311

Thans

[goolbool1]

Originally Posted by tibd

Here you go, the one from the above link. Know u asked for the G50-70, this one was for G40-70. Hope you get it on and running.

thank you so much

[mohham]

Originally Posted by tibd

Here you go, the one from the above link. Know u asked for the G50-70, this one was for G40-70. Hope you get it on and running.

Great thanks

[tibd]

U'r welcome.

[YAHYA23]

thank you

[zemestan]

my lop top model is g50 70 but ic it8586e io ic is dead how can i replace it
becuse this model ic have programed ic

[v11]

Originally Posted by ridamouh159

PARDON pour le retard
car je n'ai pas vu la demande a l'heure

Thank you my friend...

BR

[Me.Orouji]

Originally Posted by tibd

Here you go, the one from the above link. Know u asked for the G50-70, this one was for G40-70. Hope you get it on and running.