I have an Atten 8586 soldering station at work. Unfortunately I dropped it today and the only part I managed to hold on to was the soldering wand. All the wires ripped out at the connector to the station. I was hoping someone could take a pic or tell me what wires go to which pins. I would really like to repair this unit since the company owner is kind of a penny pincher. Prefer not to buy shop tools out of my pocket. Thanks in advance
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
Atten 8586 Repair Help needed
Collapse
X
-
Re: Atten 8586 Repair Help needed
I found this video which might help identify the wires in the solder iron, I see hakko 907 and the atten 8586 seem to use the same replacement iron.
https://www.youtube.com/watch?v=aVkXNvVu7EQ
and I found this with a pinout for a atten 8502, maybe they are similar
https://www.jackenhack.com/atten-850...-iron-element/Last edited by R_J; 02-04-2018, 02:43 PM.
Comment
-
Re: Atten 8586 Repair Help needed
ill disassembly mine and take picture.... wait a bit...
edit1: ops i disassembled the solder station not iron... wait
edit2: they are numbered:
1 yellow
2 red
3 nothing
4 nothing
5 blu
6 black
7 green
and here is a picture of the iron wires, as u have different color:
green is gndLast edited by dellxps15; 02-05-2018, 05:12 AM.
Comment
Comment