CyberPower 2200E not switching to AC power (0V output)

[febman]

Re: Cyber Power 2200E not switching to AC power (0V output)

I wish I'd found this forum and thread at least 24 hours ago!

Working on two 2200E units with identical problems - blown components (IC, resistors, caps, fuse).

Will now also check all caps after reading this thread.

I need help identifying the blown components as they have basically disintegrated!

Anyone able to help with a service manual and/or circuit diagram with component listings?

Thanks in advance.

Edit: Just checked the posted pics of the PCB which has helped to identify some of the components, so my thanks to the posters who took the time to upload them, but I cannot make out the markings on the IC U1.

Anyone able to shed any light on this?

Thanks again.

[Brandi008]

Re: Cyber Power 2200E not switching to AC power (0V output)

Hello Febman,
the U1 IC type is : VIPer22A
it is a 9V to 38V, DIP-8
Low Power OFF-Line SMPS Primary Switcher

You can find more infos on the Web by googling the type.
It can be found by Mouser or DigiKey for example.

Best regards,
Brandi008

[Brandi008]

Re: Cyber Power 2200E not switching to AC power (0V output)

Hello Febman
hope the service manual helping you finding out the defective components. If you have any feed back that can help other people, please be free to share it.
Best regards and happy Eastern to everybody,
Brandi008

I wish I'd found this forum and thread at least 24 hours ago!

Working on two 2200E units with identical problems - blown components (IC, resistors, caps, fuse).

Will now also check all caps after reading this thread.

I need help identifying the blown components as they have basically disintegrated!

Anyone able to help with a service manual and/or circuit diagram with component listings?

Thanks in advance.

Edit: Just checked the posted pics of the PCB which has helped to identify some of the components, so my thanks to the posters who took the time to upload them, but I cannot make out the markings on the IC U1.

Anyone able to shed any light on this?

Thanks again.

[mypagan]

Re: Cyber Power 2200E not switching to AC power (0V output)

Hello guys,

May I ask you to publish or send a private message with schematic and service manual for 2200E?

Best regards,
Pavel

[mladen82]

Re: Cyber Power 2200E not switching to AC power (0V output)

Hello all,
please don't ask me to publish SM here, i don't want to be responsible for any copyright infringement, its a Cyberpower authority
i can send to moderators and then forum badcaps.net can be responsible