think its emp 61 ..
left stored and working then power supply shutting down next use . suspected supply but couldn't see anything obvious .. main board was looking corroded on some of the ic.s so hot soapy bath followed up with Isopropyl alcohol still no joy .. scraped corrosion from between pins on ic.s with thin blade and now working fine again ..hope this helps someone else .
left stored and working then power supply shutting down next use . suspected supply but couldn't see anything obvious .. main board was looking corroded on some of the ic.s so hot soapy bath followed up with Isopropyl alcohol still no joy .. scraped corrosion from between pins on ic.s with thin blade and now working fine again ..hope this helps someone else .