Glory ws-21 coin counting and wrapping machine

[jsnconcepcion]

Hello gentlemen,
I am in a pickle of trouble, u have the MACHINE listed above and it simply will not initialize on start up. Error codes are as follows ..:
P OFF
E911-9 (XX)
the minute it starts up it automatically tells toy to reset and open and then close top over but same errors show up on display ...i've about exhausted all my avenues and I'm appealing to anyone on the site ...dam near Begging for a ny help i can get...Sincerely...jsnconcepcion
Much appreciated in advance

[stj]

Re: Glory ws-21 coin counting and wrapping machine

never seen one, but i know coin counters.
they use optical sensing, check if the lenses are dirty or soldering is bad.
you will find them near where the coins exit the bowl area.

[llonen]

Re: Glory ws-21 coin counting and wrapping machine

Do you have a manual or information about this, since there seems little information other than brochures for this.

[R_J]

Re: Glory ws-21 coin counting and wrapping machine

when ever you have mechanical and electronics they need to communicate, the electronics needs to know what state and where the mechanism is. so I would check any switches, optocouplers etc. that are activated by the mechanism.

[budm]

Re: Glory ws-21 coin counting and wrapping machine

Hard to help without seeing the pictures, details info to know what we are dealing with.

[larryflores]

Re: Glory ws-21 coin counting and wrapping machine

@jsnconcepcion, did you ever fix this power problem with your Glory WS21?