Hi.
This receiver has no sound at all, also not on the headphones. In the service mode is said: check DSP. I have added 2 1000uf 16 volt caps one at ic 1006 and a other one parralel to C1204 on the DSP. I also found out the 5 volt was only 2,1. So I swapped the IC201 5 volt regulator. 5 volt is now ok.
I am looking for the update software cable and software itself. There is no DSP ROM value seen in the service mode. The field is empty. For those with an eye for detail: service mode values I found:
Firmware: 090921-1
DA: 9-2
DSP: (empty)
HDMI: 10042011
So there might be a update necessary. Can anyone help me?
Merry christmas!
This receiver has no sound at all, also not on the headphones. In the service mode is said: check DSP. I have added 2 1000uf 16 volt caps one at ic 1006 and a other one parralel to C1204 on the DSP. I also found out the 5 volt was only 2,1. So I swapped the IC201 5 volt regulator. 5 volt is now ok.
I am looking for the update software cable and software itself. There is no DSP ROM value seen in the service mode. The field is empty. For those with an eye for detail: service mode values I found:
Firmware: 090921-1
DA: 9-2
DSP: (empty)
HDMI: 10042011
So there might be a update necessary. Can anyone help me?
Merry christmas!
Comment