I have a Samsung un60eh6050 that the back-lighting comes on, but it has no picture and no sound. I was going to see if someone could point me in the right direction.
Here are the voltages out of the power supply with everything still hooked up:
1: B13V...12.78
2: PWM_DIM...3.07
3: B13V...12.78
4: B13V...12.78
5: Vamp...12.78
6: BLU_ON/OFF...5.98
7: Vamp...12.8
8: GND...0
9: GND...0
10: GND...0
11: B5V...5.4
12: A5V...5.4
13: B5V...5.4
14: POWER ON/OFF...3.6
Also I tested the T-Con board fuse and it had 12V on both sides.
If there is anything else I need to test that may help please let me know.
Here are the voltages out of the power supply with everything still hooked up:
1: B13V...12.78
2: PWM_DIM...3.07
3: B13V...12.78
4: B13V...12.78
5: Vamp...12.78
6: BLU_ON/OFF...5.98
7: Vamp...12.8
8: GND...0
9: GND...0
10: GND...0
11: B5V...5.4
12: A5V...5.4
13: B5V...5.4
14: POWER ON/OFF...3.6
Also I tested the T-Con board fuse and it had 12V on both sides.
If there is anything else I need to test that may help please let me know.
Comment