Hi, I have a Lenovo Ideapad Z500 with motherboard VIWZ1_Z2 LA-9061P.
After pressing the power button, the power LED comes on for about 6 seconds and then shuts off.
+5VALW, +3VALW, +5V_PCH, +3V_PCH and are all ok.
I have missing +5VS, +3VS, +1.5VS and all the other main power rails due to the signal SUSP (generated by the EC KB9012QF-A3) stuck at GND.
The signals SLP_S3#, SLP_S4# and SLP_S5# (from PCH to EC) are all stuck at GND too while SLP_SUS# (from PCH to EC) is at +3V.
The signal RSMRST# (from EC to PCH) is at +2V.
Could comeone please help me out to find the problem?
Thanks in advance!
After pressing the power button, the power LED comes on for about 6 seconds and then shuts off.
+5VALW, +3VALW, +5V_PCH, +3V_PCH and are all ok.
I have missing +5VS, +3VS, +1.5VS and all the other main power rails due to the signal SUSP (generated by the EC KB9012QF-A3) stuck at GND.
The signals SLP_S3#, SLP_S4# and SLP_S5# (from PCH to EC) are all stuck at GND too while SLP_SUS# (from PCH to EC) is at +3V.
The signal RSMRST# (from EC to PCH) is at +2V.
Could comeone please help me out to find the problem?
Thanks in advance!