X453ma rev.2.0 pj8301

[kalilinux25]

Ive check the pJ8301 and its shorted to ground

But when I pump voltage on Pj8301 noting is getting hot and i cant i dentify what is getting short
I already remove the coil

[ktmmotocross]

Re: X453ma rev.2.0 pj8301

schematic please

[on/off]

Re: X453ma rev.2.0 pj8301

Boardview:
https://www.badcaps.net/forum/showpo...0&postcount=14

Repair guide:
https://www.badcaps.net/forum/showpo...31&postcount=5

[ktmmotocross]

Re: X453ma rev.2.0 pj8301

on what side is short after remove coil?

[kalilinux25]

Re: X453ma rev.2.0 pj8301

on what side is short after remove coil?

The positive sign

[ktmmotocross]

Re: X453ma rev.2.0 pj8301

what voltage r u pumping in it?

[dj_ricoh]

Re: X453ma rev.2.0 pj8301

what voltage r u pumping in it?

If you make a trace go hot 10 amps?
Lulz

[kalilinux25]

Re: X453ma rev.2.0 pj8301

If you make a trace go hot 10 amps?
Lulz

yes yes

[kalilinux25]

Re: X453ma rev.2.0 pj8301

Boardview:
https://www.badcaps.net/forum/showpo...0&postcount=14

Repair guide:
https://www.badcaps.net/forum/showpo...31&postcount=5

I cant open the bv ..
What software are you using?

[on/off]

Re: X453ma rev.2.0 pj8301

Already many times mention it on this forum

Open it with:
http://boardviewer.net/index
https://openboardview.org/

[kalilinux25]

Re: X453ma rev.2.0 pj8301

Already many times mention it on this forum

not functioning sir

[ktmmotocross]

Re: X453ma rev.2.0 pj8301

http://laptopserviz.bg/enview/bvsoft/

[on/off]

Re: X453ma rev.2.0 pj8301

not functioning sir

I don`t have any issue with software on first link.

At first time maybe the boardviewer got error, just go to option on tab graphics choose GDI, That's it.

[kalilinux25]

Re: X453ma rev.2.0 pj8301

I don`t have any issue with software on first link.

At first time maybe the boardviewer got error, just go to option on tab graphics choose GDI, That's it.

thansk sir now its working som uch thanks