Hello everyone
I have a HTPC built from Gigabyte motherboard GA-H55N-USB3
http://www.gigabyte.com/products/pro...px?pid=3455#ov
I have a i5-650 at standard clocking 3.06GHz
The problem is after a while (like 20-40 minutes), occasionally, the HTPC will just turn itself off and NUM LOCK and SCROLL LOCK on keyboard blinking.
It's a new 300W powersupply fitted (BeQuiet) SFX
RAM modules has passed memory test
I'm using CPU HD-graphics (no external GFX board)
3pcs of SSD disks.
I have pushed it hard by Intel Burn application, and it never fails.
CPU temp is low, even when the crash happens (directly start up and monitor CPU temp with Realtemp) under 45 degrees both cores.
Could this be a CAP issue?
Anyone know what the blinking num lock/scroll lock combination means?
In windows 7 event viewer I find a critical kernal error since windows were shut down in an abnormal way. Nothing else can be seen there.
Appreciate any advice!
I have a HTPC built from Gigabyte motherboard GA-H55N-USB3
http://www.gigabyte.com/products/pro...px?pid=3455#ov
I have a i5-650 at standard clocking 3.06GHz
The problem is after a while (like 20-40 minutes), occasionally, the HTPC will just turn itself off and NUM LOCK and SCROLL LOCK on keyboard blinking.
It's a new 300W powersupply fitted (BeQuiet) SFX
RAM modules has passed memory test
I'm using CPU HD-graphics (no external GFX board)
3pcs of SSD disks.
I have pushed it hard by Intel Burn application, and it never fails.
CPU temp is low, even when the crash happens (directly start up and monitor CPU temp with Realtemp) under 45 degrees both cores.
Could this be a CAP issue?
Anyone know what the blinking num lock/scroll lock combination means?
In windows 7 event viewer I find a critical kernal error since windows were shut down in an abnormal way. Nothing else can be seen there.
Appreciate any advice!
Comment