Announcement

Collapse
No announcement yet.

New Members - please post your introductions here

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Re: New Members - please post your introductions here

    I'm 55 plus . My leather shows the wear and use of four decades of use on the roads of three continents , six foreign countries and at last count twenty eight of these United States of America . I have continuously held a motorcycle endorsement since 1972 . I learned basic mechanical skills from my father , his father and a tolerant neighborhood filled with mechanics and machinists of widely varied disciplines . I have built most of my motorcycles with the exception of those I rebuilt . I have never owned a new off the showroom floor motorcycle .

    In something of a chronological order I have owned ...
    A CA72 Honda Dream , yes , the square fender , rubber band , leading link , beginning of the end for the British and American motorcycle industry .
    A BSA 441 Victor . By the time I was done only I could start it . I vowed to never again own an Amal carburettor .
    R5/RD-250/350/400 . I had so many spares just to keep them running I still find them every time I have to move .
    TZ-250 . Other than the water cooling what the hell was I thinking ?
    1969 XLCH . Rather than a simple what the hell was I thinking I really need to elaborate . This example was indiscriminately abused simultaneously from behind and from the front by the bumpers of inattentive drivers . I got it cheap . I got it cheaper than a Bonneville , CB750 , or any Italian bike I could pronounce . Then again I had to learn how to straighten frame ,forks and swing arm . The 1973 Kawasaki was a rumor at this time and it was a year before I actually heard one . In the mean time I did everything possible to defy the gods of speed and destroy the structural integrity of the Harley Davidson engine . I did finally find a way to increase the displacement , valve size , fuel consumption , noise and rear tire wear to the point where the transmission was the last weakest link in the chain . I got real good at replacing transmissions . The only thing I choose to remember was the dawn of the 1973 Kawasaki Z1 in the hands of inexperienced squids and the look on their faces as the Charley Horse drove right around them . Hours later I could be found in my parents garage replacing clutch plates , primary chain and yet another main and counter set . The following season saw a better crop of riders and aftermarket parts for the Z1 and even after resorting to Cox Motor Airplane Fuel (at least 20% Nitromethane in my day ) as a major fuel component it was trial by fire . I don't know if I was more thrilled by the now diminishing ability to demolish the egos of overly enthusiastic rice pilots or spectators were more stunned by the occasional spectacular catastrophic metallurgical destruction of the Harley Davidson .

    Interlude consisting of long periods of boredom and brief moments of absolute terror . My demons are my own and only in this one area of my life will I say " You weren't there , you weren't me , what good would it do to explain ? " Non sibi sed patriae .


    A return to the world at large brought me into the grips of visceral contact with the combustion process . I knew I couldn't beat them so I joined them .

    R5/RD-250/350/400 .I still had all those parts remember
    Triumph T140 Bonneville 750 . A British anachronism with deplorable brakes and miserable carburettors mixed with oddly stunning road manners great looks . I saw a restoration recently sell for near five times what I paid for my used 1973 . In inflation adjusted dollars a net loss .
    The Z's . So many rice pilots had turned so many of the Z's into scrap in my absence that it was a kid in a candy store moment . The aftermarket had caught up with and in some cases passed Kawasaki's original offering by a large margin .
    TX/XS650 Yamaha I still have this sickness to some degree . I was a failed motocrosser and amateur road racer (read here "not very good") but I seemed at home on the dirt . Keeping all the spinning bits in the Yamaha cases was a bit of deja vu . This experience on the dirt lead me back to the pavement as a much improved road racer and somewhat humbled competitor .
    TZ250 Again . They had improved a bunch
    Liter Bikes . They resembled the parent Kawasaki Z's like , well , you get the idea . Fully race prepped drag race from corner to corner true superbikes . Chassis development lagged far behind engine development for several years . Unless you lived through this it's difficult to explain bending handle bars getting the bike to turn in or straighten out .
    750's . The AMA obsoletes my years of engine development in a stroke and relegates the class to 750cc . Again any resemblance to the parent KZ750 was incidental if not accidental .
    GPZ/KZ550 Fun
    Honda VF500 Different kind of fun .
    Putting a license plate on the 750 race bike and surviving several near misses on the street lead to the sale of all race equipment in the span of a single weekend . On pavement I was frustrated and reduced to racing with my own money . On the dirt I was being forced into an extremely large expenditure for an XR750 just for a chance to be competitive . I find it odd that the insurance premiums for motorcycle racing were significantly larger than deep sea diving , Lloyd's of London does not .
    KZ1000 Police . I was without a motorcycle for all of three weeks . I was so deep in spares from these engines that I still have complete engines in boxes to this day. I was not going to quit riding and what sold me on the bike was the floorboards .
    And there I stayed for twenty seven years .
    ZN1300 . The Battlestar Galactica (or Gigantica depending on who...) A 120 RWHP behemoth with cross country legs .

    I saved the best for last .
    1973 Harley Davidson FLH . I originally built this for a friend and ended up with it on his death . I like the bike and know its failings well . I attempted to out think Harley Davidson at every opportunity and fairly succeeded on most points . Just a few of the modifications were a real carburettor , a complete rethink of the combustion chamber , dry clutch and belt primary , STD cases , real starter motor and hours of work in the front end .

    This is a fairly complete history of my experience .

    Only now can get to the heart of the matter . I ride . In most cases I ride very well . There have been glaring exceptions . I have owned or ridden a wide variety of motorcycles . I can't wait for the next ride . I find excuses to ride . I build kit to suit conditions and ride in bone dry near freezing temperatures because I can . I can't pass up a disabled motorcycle . I love to point out that my KZ1000 Police was built in Lincoln Nebraska . When asked what motorcycle I'm riding I am as likely to respond with "one with two wheels " as a simple "mine" . If in a group of media led leather clad lemmings I'm the one by myself in the corner laughing quietly but obviously enough that the enthusiast and compulsive obsessive people watcher can't miss me . Squids and the stereotypical credit card biker get ignored only as much as they ignore me . The squid need not be a Hyabussa owner any more than the credit card biker need be a Harley Davidson owner . They have one thing in common . They ride to be seen riding . They deserve and have earned nothing from me . I anticipate the next conversation with a rider wondering if it will be a humanoid or an over priced , self entitled mockery of motorcycling in general . Any reasonable question will be answered reasonably . I have brought many new riders into the community simply by listening . Gaining an understanding of your audience even and especially if it's a solitary hopeful motorcyclist requires the disciplined mind of the objective observer mixed with the experience of a lifetime of all things motorcycle . It's humbling indeed when you feel not just obliged but compelled to give not just the whole truth but the very best truth you can when asked something as innocent as "Why do you wear all the leather" by a 10 year old .

    Sorry for the jumble of thought above but you get it as it is . I'll just end with ...

    Some ride to be seen
    Some ride because they want to
    Some ride because they have to

    Oh , right , this is about bad capacitors . I had an interesting exchange with MSI 10 years ago . And then amateur radio . I own and operate several boat anchors , a couple of hybrids and a VHF/UHF or three ...
    AF7XT
    .. one of these days I'll have an internet connection faster than my computer.

    Comment


      Re: New Members - please post your introductions here

      I'm a database software guy that dabbles in hardware repair, thus my name! Got my first computer back in the early 80s, a XEROX 8086 DOS machine with a 10MB hard drive I hacked into a 20MB drive by changing a jumper. LOL I believe this was XEROX's only foray into the PC market. (I still have it!) I like to learn the hardware side and have used this site before to get help on specific models of electronics. I appreciate the site and all the contributors!

      Comment


        Re: New Members - please post your introductions here

        Originally posted by Topcat View Post
        A WELCOME to everyone that joins in!!

        Peta, ofcourse some advertising would always be helpful to making this a success.... This forum has existed since October 6th 2003, online the first time at about 9:00PM CST. Being a couple days old, atleast there's traffic...

        I don't know if this forum will be a huge success or not, I created it out of requests from viewers, so we'll see how many actually join... If it takes off, I'll be tickled pink!! If it flops, I'll simply remove it.

        A little about me?!?

        HMMM I'll give a little info... I've been in the electronics field since 1991, with experience ranging from TV/VCR repair all the way to industrial electronics for a very large and well known manufacturer. I started in computers in 1994, just for a change and something I thought would be more challenging.... First of all, in the computer field, I AM NOT a number cruncher (programmer) YUK!!!!! I'm a hardware/network guy... I can install any OS, repair and make it work, but sitting and typing code is more boring than watching flies mate!! So I stick to hardware!! I get the 'thrill' from coming up with cures for problems, creative and USEFUL mods (this DOES NOT include neon lights and corny batman windows in my cases)...

        Before the VP6 was around, Abit's poster child was the BP6, dual celeron board... Being one of the pioneers to run dual Coppermines in my BP6 was quite a thrill... Then came the VP6, and the dreaded crap cap problem... Thus was born PROJECT:VP6, which is over a year old... It can be viewed at www.kabalsrealm.com/systems/projects/vp6/. That single article ultimately led to badcaps.net and this forum... I was shocked at the publicity it drew...

        A little inside info?!?
        Well, age?! I'll say late 20's and that's close enough... I enjoy dealing with the computers, all of this is just a hobby these days, so if it did flop, it's no loss... I'm also a car nut... (300ZX!!!)... I also enjoy flying immencely, although, no I don't own an airplane... YET!!! Maybe if I sell off all this computer junk, I could afford one... HEH I own 3 domain names, and host sites for a few friends on this array... Of course they pay me nothing... HMMM Ohh well... Money isn't all... That's about all I think needs to be revealed... If there's something you really need to know about me, ask... The answer all depends on the question you asked...

        Anyhow,
        Peta, and everyone else that has joined, Welcome to the forums!! Bring some friends with ya!! :roll:
        Thanks for allowing me to join in this forum.

        Comment


          Re: New Members - please post your introductions here

          I'm also a motorcycle guy, did Texas-Argentina some years ago...
          Have some knowlegde in data recovery, several scrap HDs, etc.
          Found this place looking for a Bios dump to fix a motherboard.

          Comment


            Re: New Members - please post your introductions here

            Hi I'm a noob to this stuff so be patient with me

            Comment


              Re: New Members - please post your introductions here

              Hi Just a soul try to get a grip of bad caps. Your forums is most enlightening.

              Comment


                Re: New Members - please post your introductions here

                Hi, thank you to letting me in. I am doing repair as an hobby. i fix things, and I am learning everyday because of forums like this one where people can exchange knowledge.

                Comment


                  Re: New Members - please post your introductions here

                  Hi friends and thanks for accepted me in this community, I'm
                  Massimiliano Marasco 11/09/1978 Italian.
                  I'm a laptop repair and fond of electronic.
                  I use arduino for little automations.
                  I'm married we have 2 children Vittorio and Rita 4 and 2 years old
                  Thaks

                  Comment


                    Re: New Members - please post your introductions here

                    Hello folks my name is Ryan but everyone calls me Kope. I'm 35 and from Springfield MO. I love music taking things apart. Having some issues with a TV I inherited, so I did a Google search and the rest is history!!!

                    Comment


                      Re: New Members - please post your introductions here

                      Hi Guys,
                      Totally new to the whole forum thing. Im an engineer specialising in steelwork design etc but Im an all round tinkerer! Started taking the VHS player apart at age 3, almost turned mums hair dryer into a flame thrower (accidentally of course) at age 4, neighbours cat mysteriously went missing around the same time I tried to measure weight loading for an RC aeroplane at age 7....

                      Now Im 26 and the neighbours have finally started looking me in the eye again

                      Im always looking for something to do (hence the tinkering). when I sit still for 2 mins Im bored. Can never really turn my brain off.

                      I came across this site when I started fixing 2 broken TV's at home. Read an excellent how 2 written by Tom66 who seems to really know his stuff.

                      Had a few more questions to ask so I thought Id join.

                      Hope this is an OK introduction

                      Comment


                        Re: New Members - please post your introductions here

                        Hello.

                        Comment


                          Re: New Members - please post your introductions here

                          I'm a newbie here.

                          Comment


                            Re: New Members - please post your introductions here

                            I'm a newbie here. I think I can learn a lot and also share some toughts

                            Comment


                              Re: New Members - please post your introductions here

                              I just joined to try and fix my LG 47LN541C.

                              Comment


                                Re: New Members - please post your introductions here

                                Hi,

                                I'm new here.
                                I registered to get access to some informations about stuff and try to repair "temporarly dead" things.

                                Comment


                                  Re: New Members - please post your introductions here

                                  My name is andrew and im new to this forum. I have always loved fixing things and learning about fixing just about anything. Cars to home repairs, computers to relationships. Lol Hope to help and helped by my new online friends

                                  Comment


                                    Re: New Members - please post your introductions here

                                    I've heard about badcaps and even visited several times and discovered that our rv042 failed because of bad caps. I read some threads and learned to identify bad caps, and it's AMAZING how much equipment fails today because of them.

                                    Fast forward to today and I found out the root cause of my mom's system's video glitching (which I built for her 2 years ago) was because the video card has puffy caps and two that have started to leak from the top.

                                    I had no idea that badcaps could service the equipment, so I think I've found my one stop shop. I have two more systems that have died due to bad caps and several vintage systems that may need service in years to come.

                                    Comment


                                      Re: New Members - please post your introductions here

                                      Hi guys!
                                      I'm another newbie, with limited experience in repair of TVs, usually by replacing the affected board(s). But I have also successfully replaced capacitors on power supply boards. Hoping to gain from the experience of others. Great site!!

                                      Comment


                                        Re: New Members - please post your introductions here

                                        Hi

                                        Comment


                                          Re: New Members - please post your introductions here

                                          I am a newbie here. I completely forgot that I registered for this account back in 2014 but I haven't posted until now.

                                          If I could please get my account setup so I can I post a question regarding a monitor issue that would be great.

                                          Thanks,
                                          Tim

                                          Comment

                                          Working...
                                          X