Kenwood DNN991 Reset sofware

[mendezjonathan]

Hi, I have a Kenwood Model DNN991 unit, I bought it from EBay but it has an entry password.
Is there a way to restart the software?
and leave it from the factory?
I have heard that placing a master password can .. can you help me?

[R_J]

Re: Kenwood DNN991 Reset sofware

Does this:
https://manual.kenwood.com/ce/im383/...hooting-2.html
or this help
http://manual.kenwood.com/ce/im383/N...foreUse-2.html

[mendezjonathan]

Re: Kenwood DNN991 Reset sofware

714/5000
thank you for attending my request,
the problem is the following I can not enter the operating system,
I have done the reset for the red triangle but the unit continues entering the menu of the photos ...
the person who sold me the unit told me the password of the user "batking" and with this user and password I enter the "route collector" page, but I can not access the system of the unit ..
It tells me that the password is incorrect or the service is not active.
I have asked the Kenwood service and they tell me that I must take the unit to the technical service so that with a code they can restart the unit.
Is it possible to access the system in another way?
Do you have another way of hard reset?

[R_J]

Re: Kenwood DNN991 Reset sofware

Have you tried the guest account?
Someone else had this problem https://www.justanswer.com/car-elect...1hd-model.html
It likely won't help but have a look

[mendezjonathan]

Re: Kenwood DNN991 Reset sofware

ok thanks for the information I will try to look to see if I solve my problem

[tibimakai]

Re: Kenwood DNN991 Reset sofware

I was thinking about your issue, and I think that you should go to the Route Collector site, and sign up there, than use your credentials to log into the Kenwood.