Palvilion G6-2000 will not turn on

[bicalov]

Re: Palvilion G6-2000 will not turn on

at the moment I have a short on the 1.05V_VTT line, 3V line, 3VS5 line, 5VS5 line, and maybe some more. All these lines have 0,00 ohm to gnd.
In order to find out where to look, I made a overview of the pages from the schematics. Now I want to look on which pages the shorted voltages come all together. I think that the page where all of them are, can indicate where to look.
Please comment if this is a good approach or an useless approach. thx.

[bicalov]

Re: Palvilion G6-2000 will not turn on

Overview in one color. Now you can select the voltage lines you want en take away the background color, so you can see better than the one with all the colors.

let me know

[bicalov]

Re: Palvilion G6-2000 will not turn on

Regretfully the mobo has gone electronic heaven.
I put 3V on the 3VPCU line and U22 PCH got hot.
No chance for me to change that one, so end of story.
Thx for all the advise from the few above.

[meritosari]

Re: Palvilion G6-2000 will not turn on

that why I told the "ferrari", have 2 times experience like this and the result kill sio + chipset. forgot to put in back to board

maybe more safely if you take off from board the pwm and high side mosfet also (or both mosfets and pwm), but this way never been practice it

let's make what happens today, a valueable knowledge for all of us

[bicalov]

Re: Palvilion G6-2000 will not turn on

Thanks

[kazia]

Re: Palvilion G6-2000 will not turn on

it's sad to read this end of story, but like meritosari said "let's make this story a valueable knowledge".

[bicalov]

Re: Palvilion G6-2000 will not turn on

thx kazia, I certainly learned.

[mohammed aram]

Re: Palvilion G6-2000 will not turn on

very good subject