I've got an MS-7185 board with obvioulsly bad caps along the CPU side. I know standard procedure is to replace all the caps on the motherboard but before I shell out for a new set of caps I'd like to test the board after replacing just the six caps at the CPU socket and determine whether this is a board I want to use or not. I don't have on hand caps of the exact value (1500uf 6.3v) but have some 1000uf and 1200uf caps that will fit. Would any of them work to test the board before I buy a cap kit for it? I am on an extremely tight budget and am not going to do a full re-cap if it's a board I don't want to use anyway.
Thanks in advance.
Thanks in advance.
Comment