Announcement

Collapse
No announcement yet.

Another Yamaha

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #61
    Re: Another Yamaha

    The standby led supply voltage is the +3.3M It can be tested on operation board plug CB473 (page 136) There is also the control line from the main microprocessor ic which is the pin next to it, it should change when the amp goes from operate to standby

    Comment


      #62
      Re: Another Yamaha

      I'll test that tomorrow, but for now it seems to be ok, it's working at least.
      One other issue I noticed is that when I press 'sur decode' it goes into 'straight' mode when it should go into 'neo' mode

      Comment


        #63
        Re: Another Yamaha

        Try doing a full reset, if that does'nt help check the firmware version, I see there is a firmware update to ver. 1.80

        Comment


          #64
          Re: Another Yamaha

          Firmware is already 1.80
          Just turned the amp off, red standby light is now on lol ??

          Comment


            #65
            Re: Another Yamaha

            Thats likely how it works, standby led lit in standby, turns off when amp is on.

            Comment


              #66
              Re: Another Yamaha

              It does, but it it hadn't lit since last week

              Comment


                #67
                Re: Another Yamaha

                Update.
                Looks like she's back to her old self again, everything is working as it should, watched a couple of movies, no issues, does seem to be a tad warmer than I remember, maybe it's just me being paranoid lol.

                Anyway, want to say thank you again to R_J for his time and help and everyone else who also joined in.

                Comment


                  #68
                  Re: Another Yamaha

                  Update again.
                  Amp still working, yay
                  Now I need to fix the on/off button on the remote, :/

                  Comment

                  Working...
                  X