Badcaps.net Forum
Go Back   Badcaps Forums > Troubleshooting Hardware & Devices and Electronics Theory > Troubleshooting Game Consoles & Other Weird Devices
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
Thread Tools Display Modes
Old 02-06-2019, 08:07 AM   #41
redriddick
Member
 
Join Date: Dec 2014
City & State: THE WOODS
My Country: Ireland
I'm a: Knowledge Seeker
Posts: 72
Default Re: Speed controller for golf trolley

Where to start?
redriddick is offline   Reply With Quote
Old 02-06-2019, 11:21 AM   #42
budm
Badcaps Veteran
 
budm's Avatar
 
Join Date: Feb 2010
City & State: S.F. Bay area
My Country: USA
Line Voltage: 120V 60Hz
I'm a: Knowledge Seeker
Posts: 34,710
Default Re: Speed controller for golf trolley

https://www.badcaps.net/forum/attach...6&d=1548445387
What are the P/N as printed on top of those two IC's?
__________________
Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956

Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999

Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl

Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/

TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809
budm is offline   Reply With Quote
Old 02-06-2019, 11:52 AM   #43
R_J
Badcaps Veteran
 
Join Date: Jun 2012
City & State: ☻
My Country: Canada
I'm a: Professional Tech
Posts: 3,316
Default Re: Speed controller for golf trolley

It looks like the one ic is a LM78L05 regulator and the other one could be a microchip 12C5xx pic ic

Last edited by R_J; 02-06-2019 at 12:00 PM..
R_J is online now   Reply With Quote
Old 02-06-2019, 12:36 PM   #44
redriddick
Member
 
Join Date: Dec 2014
City & State: THE WOODS
My Country: Ireland
I'm a: Knowledge Seeker
Posts: 72
Default Re: Speed controller for golf trolley

Will check them in a min
redriddick is offline   Reply With Quote
Old 02-06-2019, 12:45 PM   #45
redriddick
Member
 
Join Date: Dec 2014
City & State: THE WOODS
My Country: Ireland
I'm a: Knowledge Seeker
Posts: 72
Default Re: Speed controller for golf trolley

Quote:
Originally Posted by budm View Post
https://www.badcaps.net/forum/attach...6&d=1548445387
What are the P/N as printed on top of those two IC's?
12c671 and 78L05A i think
redriddick is offline   Reply With Quote
Old 02-06-2019, 12:56 PM   #46
R_J
Badcaps Veteran
 
Join Date: Jun 2012
City & State: ☻
My Country: Canada
I'm a: Professional Tech
Posts: 3,316
Default Re: Speed controller for golf trolley

Have you checked to see if you have 5 volts coming out of the regulator ic?
Where does the speed pot connect and where does the on/off switch connect?
R_J is online now   Reply With Quote
Old 02-06-2019, 01:17 PM   #47
redriddick
Member
 
Join Date: Dec 2014
City & State: THE WOODS
My Country: Ireland
I'm a: Knowledge Seeker
Posts: 72
Default Re: Speed controller for golf trolley

Quote:
Originally Posted by R_J View Post
Have you checked to see if you have 5 volts coming out of the regulator ic?
Where does the speed pot connect and where does the on/off switch connect?
The blue and red wire are where the pot and on off switch are connected.
I will have 're solder the mosfets and relay before I can test for 5v
redriddick is offline   Reply With Quote
Old 02-06-2019, 02:08 PM   #48
R_J
Badcaps Veteran
 
Join Date: Jun 2012
City & State: ☻
My Country: Canada
I'm a: Professional Tech
Posts: 3,316
Default Re: Speed controller for golf trolley

The way it likely works is 12 volts is applied to the board from the battery, U3 supplies 5 volts to the pic processor. when the switch/pot is activated the pic outputs a pwm signal to Q4 & Q5 then to the output transistors (this is the variable speed signal) then the pic also turns on the relay connecting the transistor output to the motor, driving the motor at whetever the speed pot is set to. The relay is likely also used to provide dynamic braking for the motor
Q7 looks like the relay drive transistor, D3 is protection across the relay coil.

I believe that diode D1? (to220 dual diode?) is likely connected across the motor to protect the output transistors.

Last edited by R_J; 02-06-2019 at 02:26 PM..
R_J is online now   Reply With Quote
Old 02-06-2019, 09:05 PM   #49
budm
Badcaps Veteran
 
budm's Avatar
 
Join Date: Feb 2010
City & State: S.F. Bay area
My Country: USA
Line Voltage: 120V 60Hz
I'm a: Knowledge Seeker
Posts: 34,710
Default Re: Speed controller for golf trolley

Post #17 also suggested to test the Voltages, but no data from OP.
budm is offline   Reply With Quote
Old 02-13-2019, 08:46 AM   #50
redriddick
Member
 
Join Date: Dec 2014
City & State: THE WOODS
My Country: Ireland
I'm a: Knowledge Seeker
Posts: 72
Default Re: Speed controller for golf trolley

There is 5v to the pic
redriddick is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums 2003 - 2019
Powered by vBulletin ®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 07:46 PM.
Did you find this forum helpful?