Previous donor told me it turns on "when it feels like it".
I crack it open and fail to find any popping on the caps. I use ESR Micro 3.1 and make a few readings:
C105 features a JH CD266 (827604) 100uF/450V testing at 93uF and 0.01 Ohms
C107 (forgot to take readings)
C108 features a SamYoung NXB 820uF/25V
C112 (same as C108)
C113 features a SamYoung NXE 1000uF/10V
C116 (same as C133)
C118 (forgot to take readings)
C119 features a SamYoung (forgot the series) 330uF/10V
C301 features a SamYoung LXZ 820uF/25V testing at 3544uF/0.00 Ohms
C302 (same as C301)
My current plan of attack is a blanket replacement once I get enough qualifying 820uF capacitors.
I'd love suggestions for a more focused plan with specific parts. Given the 23" screen, I'd love to get this working.
Thanks for reading!
I crack it open and fail to find any popping on the caps. I use ESR Micro 3.1 and make a few readings:
C105 features a JH CD266 (827604) 100uF/450V testing at 93uF and 0.01 Ohms
C107 (forgot to take readings)
C108 features a SamYoung NXB 820uF/25V
C112 (same as C108)
C113 features a SamYoung NXE 1000uF/10V
C116 (same as C133)
C118 (forgot to take readings)
C119 features a SamYoung (forgot the series) 330uF/10V
C301 features a SamYoung LXZ 820uF/25V testing at 3544uF/0.00 Ohms
C302 (same as C301)
My current plan of attack is a blanket replacement once I get enough qualifying 820uF capacitors.
I'd love suggestions for a more focused plan with specific parts. Given the 23" screen, I'd love to get this working.
Thanks for reading!
Comment