Hey Guys,
Need some advice from the electronic engineers amongst you.
My PC went flaky last night.
The fan had failed on the PSU and half a dozen caps were bulging.
It's not a cheapie and has served well for 4 years so I am hoping to redeem it.
I have the correct value caps except for the two new blue Ruby's under the heatsink beside the coil.
The originals were 680uF x 16V Capxons.
Would it be OK to use 1000uF x 16V as replacements here?
I am hoping precise values are not critical.
Thanks in advance for your help.
Brett.
Need some advice from the electronic engineers amongst you.
My PC went flaky last night.
The fan had failed on the PSU and half a dozen caps were bulging.
It's not a cheapie and has served well for 4 years so I am hoping to redeem it.
I have the correct value caps except for the two new blue Ruby's under the heatsink beside the coil.
The originals were 680uF x 16V Capxons.
Would it be OK to use 1000uF x 16V as replacements here?
I am hoping precise values are not critical.
Thanks in advance for your help.
Brett.
Comment