Panasonic Blu-ray Disc Player -SA-BTT490 - Dead

[AlbertRoss]

Hi, have this Blu-ray disc player that is completely dead due to being powered by 220-240V while the duel voltage switch was set for 110-127V.

The internal 250V 3AH fuse did not blow and the IC5799 has been destroyed.

When the player is connected to 220-240V, I have 110V across the mentioned fuse.

Having not repaired any disk players (only tvs) I'm stuck on what to check next?

Thanks.

[stj]

Re: Panasonic Blu-ray Disc Player -SA-BTT490 - Dead

that piece of shit looks familiar - alot like the SA-PT860

the chip is probably:MIP4110MSSCF

check any diodes near it, and dont forget to check for surface-mount parts on the underside.

[stj]

Re: Panasonic Blu-ray Disc Player -SA-BTT490 - Dead

possible example schem.

[budm]

Re: Panasonic Blu-ray Disc Player -SA-BTT490 - Dead

Service manual:
http://elektrotanya.com/?q=showresul...at2=schematics

[TheDragon]

Re: Panasonic Blu-ray Disc Player -SA-BTT490 - Dead

Hi, sorry to interject but If you manage to fix yours, maybe you could give some pointers to mine, though a different issue.

https://www.badcaps.net/forum/showth...d=1#post528531

Thanks

[raymihrege]

Re: Panasonic Blu-ray Disc Player -SA-BTT490 - Dead

hi, have this blu-ray disc player that is completely dead due to being powered by 220-240v while the duel voltage switch was set for 110-127v.

The internal 250v 3ah fuse did not blow and the ic5799 has been destroyed.

When the player is connected to 220-240v, i have 110v across the mentioned fuse.

Having not repaired any disk players (only tvs) i'm stuck on what to check next?

Thanks.

ic5799=mip2f2

[raymihrege]

Re: Panasonic Blu-ray Disc Player -SA-BTT490 - Dead

Ic5799=mip2f2