I have a HP L1706 flat screen monitor that powers "on" but has a black screen.
If I shine a flashlight from an angle I can see what's supposed to be lit up or displayed on the screen.
I pulled the AIO board and it has several bad caps, so I want to replace them but I could use some advise as to what to replace them with.
Here's what is currently on the board (referenced in my pic also)
They're all Su'scon caps
#1 25v 470uF 105° x 5 (3 bulging)
#2 50v 470uF 105° x1
#3 16v 680uF 105° x1
#4 16v 47uF 105° x7
#5 16v 4.7uF 105° x3
#6 50v 10uF 105° x2
#7 450v 100uf 105° x1
Question on finding replacements;
besides V, uF, temp, and physical size what other spec's are important when finding a replacement cap?
I'm not an electronics guru so some of the other spec's is where I get lost or confused when they don't 'match' the original cap.
eg.; ripple current, impedance and the different series within manufacturer.
If I shine a flashlight from an angle I can see what's supposed to be lit up or displayed on the screen.
I pulled the AIO board and it has several bad caps, so I want to replace them but I could use some advise as to what to replace them with.
Here's what is currently on the board (referenced in my pic also)
They're all Su'scon caps
#1 25v 470uF 105° x 5 (3 bulging)
#2 50v 470uF 105° x1
#3 16v 680uF 105° x1
#4 16v 47uF 105° x7
#5 16v 4.7uF 105° x3
#6 50v 10uF 105° x2
#7 450v 100uf 105° x1
Question on finding replacements;
besides V, uF, temp, and physical size what other spec's are important when finding a replacement cap?
I'm not an electronics guru so some of the other spec's is where I get lost or confused when they don't 'match' the original cap.
eg.; ripple current, impedance and the different series within manufacturer.
Comment