Has anyone mounted a tv on an articulating wall mount, with the back cover of tv off? Do you see any potential problems? my tv runs cooler with back off. Has been mounted to tv stand without cover thru a piece of wood, with no problems, the wall mount is metal tho and would reside close to power board. Thank you for any feedback.
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
Mount tv but leave back cover off?
Collapse
X
-
Re: Mount tv but leave back cover off?
i see no problems, it's fully enclosed still.
i had some tv's once that HAD to be run with the back removed.
SONIX brand - made to look like SONY from a distance!!
someone at the factory messed up and the grills in the plastic & metal bits did not line up,
so that model always overheated after a couple of hours - loads of them got dumped on the surplus market!!
-
Re: Mount tv but leave back cover off?
I would put a fan in the back cover and keep it on. It depends on your household.
As long as no one can touch parts on the backside and get a shock.
As long as no flammable stuff nearby (drapes fabric books magazines etc.).
I have seen with TV stand mods is they break and the TV lands on the kids... That was plywood with no corner braces oops
Comment
-
Re: Mount tv but leave back cover off?
You might be surprised but TV parts can run cooler with the cover on. This is because the cover ducts the rising warm air cooling heatsinks. While the ambient of the TV is hotter with the cover on, important hot parts are cooler on average.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
Comment
Comment