Announcement

Collapse
No announcement yet.

Capactior Qustions help please

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Capactior Qustions help please

    I've got 2 bulging capacitors on a Samsung power board they are Capxon I've picked a couple of Panasonic ones to replace them could anyone advise if the ones I picked are suitable replacements or any suggestions
    Bad ones capxon
    1000uf 10v,10x16size1040ripple,0.076inpedance
    470uf 25v,10x16size1200ripple,0.076inpedance
    Replace with Panasonic
    1000uf 10v,10x16size,1.790ripple,0.026inpedance
    470uf 10v,10x16size,1.790ripple,0.026inpedance
    Got from these data sheets
    http://www.paullinebarger.net/DS/Capxon/
    http://www.paullinebarger.net/DS/Panasonic/
    Thanks for any help
    Tags: None
    #2
    Re: Capactior Qustions help please

    The 470uf should be rated at 25v as the original is, not 10v.
    I don't think the ripple numbers are represented in your post correctly but I'm not gonna dl the pdf's to check them.

    Comment

      #3
      Re: Capactior Qustions help please

      Originally posted by SteveNielsen View Post
      The 470uf should be rated at 25v as the original is, not 10v.
      I don't think the ripple numbers are represented in your post correctly but I'm not gonna dl the pdf's to check them.
      SteveNielsen Your right I mistyped it should read 470uf 25v and the ripple should read 1790 I copied those specs from the data sheets would they work ok for replacements
      Thanks for the help

      Comment

        #4
        Re: Capactior Qustions help please

        Higher ripple rating is OK/Better.
        Never stop learning
        Basic LCD TV and Monitor troubleshooting guides.
        http://www.badcaps.net/forum/showthr...956#post305956

        Voltage Regulator (LDO) testing:
        http://www.badcaps.net/forum/showthr...999#post300999

        Inverter testing using old CFL:
        http://www.badcaps.net/forum/showthr...er+testing+cfl

        Tear down pictures : Hit the ">" Show Albums and stories" on the left side
        http://s807.photobucket.com/user/budm/library/

        TV Factory reset codes listing:
        http://www.badcaps.net/forum/showthread.php?t=24809

        Comment

          #5
          Re: Capactior Qustions help please

          Thanks for the help Steve ,Bud got them ordered today

          Comment

            #6
            Re: Capactior Qustions help please

            I replaced the 2 caps but didn't help I'm going to replace the all of the caps which I should have done to start with. I can't find some of the caps in the Panasonic FM or FR series but there's some in the FC series from the data sheets I can't see a lot of differences other then a wider Temp range and Impedance is a little lower for the FM an FR

            My question is would the FC work OK, or is there better choices.
            Thanks for any help

            Comment

              #7
              Re: Capactior Qustions help please

              From what I have seen looking at the datasheets for the FC, FM, and FR is that the FC just has a shorter endurance life compared to the FM and FR.

              Comment

                #8
                Re: Capactior Qustions help please

                Thanks for the help Almighty1 I just wanted to make sure that the FC series caps are suitable for Power Boards I have already installed 2 FM caps on this board trying to stay with Panasonic the closest matches I could find to the FM and FR series was the FCs.
                Thanks again

                Comment

                Previous template Next
                Working...
                X