HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

[loser18]

Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

You should have 28V on pin 1 i think...check voltages on PR118, PQ18, PQ17 & PR127 PR129...

[farrazi]

Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

thanks for schematic and bios file.., JOOOOSSSSS GANDOSSS (ferry nice )

[ryogadan]

Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

Hi,
where I can find PQ12?

[loser18]

Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

Hi,
where I can find PQ12?

It should be around PU12...
It's a high driving FET for CPU CORE voltage...
If you won't find it I'll take a pic when I'll have a time...

[osman458]

Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

ec & main bios plase !!!
hp part 650199-001
daor13mb6e1 rev.e

[loser18]

Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

Osman...there's main BIOS dump,just check 1st page...if You won't get EC pm me & will upload (if I've got it)

[atlas.tech]

Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

hi tank you for this suport

[atlas.tech]

Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

i want to reed kb9012 program plz hep me

[mohamedalepgig]

Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

thanks a lot

[angel-boy]

Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

i need bios file but my board is with en25f32 , kb3930qf is this programable ? , if yes, what can i use to read this

i found bios and ec, but i did not find ec i.c.

[bishnu]

Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

chenge pu3

[Nasir Raja]

Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

Thanks for sharing

[and555]

Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

Also checked PU9 pin9 & getting 3.25V - This is not right, is it???

It's ok.
ACIN mean active high, while high : AC power adapter plugged.
in other schematic there is ACIN# mean active low, while low : AC power adapter is plugged.
note: # mean active low.

Reflashed, but got no led however all pins read 3.3V except pin4...

, pin4 is GND.

BTW, did your problem solved.

[nts28]

Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

thankyou

[mesdova]

Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

This

[mbertaina]

Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

Reflashed, but got no led however all pins read 3.3V except pin4...

Also noticed that hex of your file is different so flashed it back with original dump & got led back on & BIOS voltages are OK...

BTW mine is 4mb...

ATTACHING MY DUMP, SOMEONE MAY FIND IT USEFUL, BUT PLS BEAR IN MIND THAT'S UNTESTED...

hi everyone, i tested the bios dump posted by LOSER18 and his working fine!

really thanks!

[king ripper]

Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

hi, can anybody help with bios to hp 17-g132nw, is very hard to find, my laptop started to 0,31A, with dark screen, there is no tension on cpu coil, my mb:

cpu: sr2eu

mb: dax1admb6f0 rev: f

gpu: 216-0864018

kbc: it8987e - bxa

laptop has flooded keyboard so i think that firmware on kbc is damage, so i need main and ec dump, thx for any help, i post my BIOS mayby somebody can check

[piernov]

Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

If the fan spins and there is no CPU VCore, the BIOS shouldn't be the issue here. You would need to trace out why there is no CPU VCore.

[boss juben]

Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

thanks

[enversefa]

Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

thanks