Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]

Announcement

Collapse
No announcement yet.

PANASONIC plasma TH-P42X20A SOS 4 blinks

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    PANASONIC plasma TH-P42X20A SOS 4 blinks

    So I had this TV and an amp plugged into the same powerpoint when the amp blew and took the TV with it . When I turn it on the standby light starts off flashing green, then goes to red and does the 4 SOS blinks.

    Now, I've found the service manual (I'd post it but it claims doing so is illegal) and I do have a Bryman BM235 multimeter, is anyone here able to help me find and fix the problem I'm having. I have a tiny bit of experience fixing TV's but they've mostly been simple fixes like replacing caps and based on this thread, I'm pretty sure it's not that simple. TW2005 states in that thread that an SOS4 on this board usually means a shorted VSUS, I don't know how to read wiring diagrams yet so finding it is my next task.
    Tags: None
    #2
    Re: PANASONIC plasma TH-P42X20A SOS 4 blinks

    Did you have a thunderstorm? If you did, you should have unplugged the TV and amp.
    ASRock B550 PG Velocita

    Ryzen 9 "Vermeer" 5900X

    16 GB AData XPG Spectrix D41

    Sapphire Nitro+ Radeon RX 6750 XT

    eVGA Supernova G3 750W

    Western Digital Black SN850 1TB NVMe SSD

    Alienware AW3423DWF OLED




    "¡Me encanta "Me Encanta o Enlistarlo con Hilary Farr!" -Mí mismo

    "There's nothing more unattractive than a chick smoking a cigarette" -Topcat

    "Today's lesson in pissivity comes in the form of a ziplock baggie full of GPU extension brackets & hardware that for the last ~3 years have been on my bench, always in my way, getting moved around constantly....and yesterday I found myself in need of them....and the bastards are now nowhere to be found! Motherfracker!!" -Topcat

    "did I see a chair fly? I think I did! Time for popcorn!" -ratdude747

    Comment

      #3
      Re: PANASONIC plasma TH-P42X20A SOS 4 blinks

      Originally posted by RJARRRPCGP View Post
      Did you have a thunderstorm? If you did, you should have unplugged the TV and amp.
      Nope, was working fine and it blew. I'm usually pretty good with storms (too much crap to lose to being lazy). Something is definitely wrong with the outlet because it no longer needs to be switched on to power devices (but that's a job for a qualified sparky).

      Comment

        #4
        Re: PANASONIC plasma TH-P42X20A SOS 4 blinks

        Bump

        Comment

          #5
          Re: PANASONIC plasma TH-P42X20A SOS 4 blinks

          You only said the TV and the amp were plugged into the same receptacle. You never said if the amp is connected TO THE TV. If the TV and amp are merely plugged into the same receptacle, it is unlikely the amp has anything to do with the TV failure.

          On the TV with TV disassembled, disconnect the power cable going from the SC board to the power board (The SC board is on the left side as viewed from rear of TV). Then plug in the TV and turn it on. Do you still get an SOS 4X blink? or does the SOS change to a 7X blink?

          Comment

          Previous template Next
          Working...
          X