MacBook Pro A1297 820-2610-A short

[hackintosher]

Logic board does not turn on, no green light.
There is a short to ground (0 ohms) on C7565.
I have replaced the C7771 and after removing Q7565 the short still exists.
I have injected 1V on C7565 and only 1.8 A is used.
I haven't noticed anything getting very hot.

Any suggestions appreciated.

[mon2]

Re: MacBook Pro A1297 820-2610-A short

Hi. Do not have access to the schematics at this time but if you do not have a green light then this means your magsafe is not working. The adapter communication must exist to power the logic board. Check the magsafe power in and the circuit that communicates over the one-wire interface. If this first rail is not powered, there will be no charger light. This area must work first before proceeding further on the logic board.