Announcement

Collapse
No announcement yet.

Help With EZP2019+ Programmer

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Help With EZP2019+ Programmer

    Hello. I Have an EZP2019+ Programmer with an assortment of adapters that I am trying to use to dump the original BIOS firmware from a MICRON 25Q128A IC (Datasheet here) and then flash the newest BIOS firmware.

    I have the chip de-soldered from the motherboard and have the chip fitted securely into the "200-209mil SOP8 Socket" adapter. This adapter is placed into the top portion of the 1.8V adapter and that] adapter is connected to the top portion of the programmer.

    It doesn't seem like the software is able to read the chip:



    Since the datasheet says this is a 1.8V chip, I have it connected in the 1.8V adapter socket. Here is my setup:



    Am I doing this right? Why can't it read the chip?

    #2
    Re: Help With EZP2019+ Programmer

    That's the N25Q512A ID, not the N25Q128A ID.
    The NOR Flash was probably wrongly marked.

    Comment

    Working...
    X