Hi guys
I know nothing about fixing cameras
This is from my BGA rework Machine, it is part of the optical alignment system for placing BGA in the correct position on the PCB
It's only a few months old, it was working but became more and more intermittent and now it does not work - the monitor says No Signal.
I tested the monitor with another video source and tried another HDMI cable. The monitor works fine
I checked it had 12V present while it was still attached to the machine
The connections are marked
12V
GND
GND
A
B
There is no brand name on the camera as far as I can see
What should I check, and what is supposed to be on the connections A and B?
Rich.
I know nothing about fixing cameras
This is from my BGA rework Machine, it is part of the optical alignment system for placing BGA in the correct position on the PCB
It's only a few months old, it was working but became more and more intermittent and now it does not work - the monitor says No Signal.
I tested the monitor with another video source and tried another HDMI cable. The monitor works fine
I checked it had 12V present while it was still attached to the machine
The connections are marked
12V
GND
GND
A
B
There is no brand name on the camera as far as I can see
What should I check, and what is supposed to be on the connections A and B?
Rich.
Comment