Badcaps.net Forum
Go Back   Badcaps Forums > Welcome to the Badcaps.net Tech Forum! > Announcements & Related News
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
Thread Tools
Old 05-24-2018, 08:50 PM   #19201
kaptenmy
New Member
 
Join Date: May 2018
City & State: kuala lumpur
My Country: malaysia
I'm a: Knowledge Seeker
Posts: 2
Default Re: New Members - please post your introductions here

im new member.... im computer service technician on my own...just new to tv repair
kaptenmy is offline   Reply With Quote
Old 05-24-2018, 10:11 PM   #19202
ken75
New Member
 
Join Date: May 2018
City & State: conroe, texas
My Country: usa
I'm a: Knowledge Seeker
Posts: 1
Default Re: New Members - please post your introductions here

Just a quick note to say how pleased I am to have found this place. I have been in the computer field since 1960. First school was U.S. Air Force. I worked mainframes until 1972. My first personal computer was built with the Intel 8008 and I have been hooked ever since. Looking forward to a rewarding relationship here. Thanks.
ken75 is offline   Reply With Quote
Old 05-25-2018, 01:33 AM   #19203
Forb
New Member
 
Join Date: May 2018
City & State: Poltava
My Country: Ukraine
I'm a: Knowledge Seeker
Posts: 2
Default Re: New Members - please post your introductions here

I've some problem with my car radio JVC KW-NT700. Hope to get help from this forum.
Forb is offline   Reply With Quote
Old 05-26-2018, 09:01 AM   #19204
MASTER_TECH_101
New Member
 
Join Date: May 2018
City & State: PA
My Country: USA
I'm a: Knowledge Seeker
Posts: 5
Default Re: New Members - please post your introductions here

Hi guys!
Pleased to introduce myself to the groop.
My name is Sen and I'm master electronics tech, located in Philadelphia, USA
32 years in business fixing diagnosing and designing consumer electronics.
I have very little free time but will do my best to help you
solve any electronics related issue.
MASTER_TECH_101 is offline   Reply With Quote
Old 05-26-2018, 09:03 AM   #19205
MASTER_TECH_101
New Member
 
Join Date: May 2018
City & State: PA
My Country: USA
I'm a: Knowledge Seeker
Posts: 5
Default Re: New Members - please post your introductions here

Hello my former countryman, Yugoslavia
MASTER_TECH_101 is offline   Reply With Quote
Old 05-26-2018, 09:09 AM   #19206
MASTER_TECH_101
New Member
 
Join Date: May 2018
City & State: PA
My Country: USA
I'm a: Knowledge Seeker
Posts: 5
Default Re: New Members - please post your introductions here

Welcome Maria
MASTER_TECH_101 is offline   Reply With Quote
Old 05-26-2018, 09:14 AM   #19207
MASTER_TECH_101
New Member
 
Join Date: May 2018
City & State: PA
My Country: USA
I'm a: Knowledge Seeker
Posts: 5
Default Re: New Members - please post your introductions here

Hello dentist.
I can help you with your TV repair, shoot any questions
MASTER_TECH_101 is offline   Reply With Quote
Old 05-26-2018, 09:55 AM   #19208
badjojo
New Member
 
Join Date: May 2018
City & State: oujda
My Country: morocco
I'm a: Knowledge Seeker
Posts: 1
Default Re: New Members - please post your introductions here

hi everyone my name is mostafa from happy to be here with you guys ,i have just start reparing electronic stuff my last repair was apple macbook pro a1260 and a1226 which they have a gpu issue i reflowed them and they worked well and allso i used a software that alow me to controll the fan to reduce heat from gpu and thats all thank u
badjojo is offline   Reply With Quote
Old 05-26-2018, 02:15 PM   #19209
dgatwood
New Member
 
Join Date: May 2018
City & State: Sunnyvale, CA
My Country: USA
I'm a: Knowledge Seeker
Posts: 5
Default Re: New Members - please post your introductions here

Hi. I'm joining the board to ask about a T-CON failure shortly after a power supply failure, and a general question about supply ripple tolerances in a Samsung TV. I'm a software engineer by trade, but I've recapped a fair number of things in my day.
dgatwood is offline   Reply With Quote
Old 05-26-2018, 05:54 PM   #19210
sykes67
New Member
 
Join Date: May 2018
City & State: Dallas,tx
My Country: United States
I'm a: Knowledge Seeker
Posts: 3
Default Re: New Members - please post your introductions here

Hey everyone. My name is Otis. I'm 51and live in Dallas. I have backgrounds in auto, diesels mechanic and welding. I have​ always been very inquisitive about how things work. At the age of 7 my mom's blender went out I took it completely apart, fixed it and it ran better than brand new. I have always loved to take things apart to see how they work put them back together. And it says think if I do something once I almost like Master it it's like I've done it millions of times before I call it a god-given gift. There is nothing that I can't do. I'm always looking for ways to improve our life the things around us environments anyway guys thank you for having me on this forum.
sykes67 is offline   Reply With Quote
Old 05-26-2018, 05:58 PM   #19211
sykes67
New Member
 
Join Date: May 2018
City & State: Dallas,tx
My Country: United States
I'm a: Knowledge Seeker
Posts: 3
Default Re: New Members - please post your introductions here

And also it seems like there's nothing that I have not run across before that I could not diagnosis, repair, replace and greatly improve it's​performance.
sykes67 is offline   Reply With Quote
Old Yesterday, 06:13 AM   #19212
PROTOTYPE-1
New Member
 
Join Date: May 2018
City & State: Delhi
My Country: India
I'm a: Knowledge Seeker
Posts: 2
Default Re: New Members - please post your introductions here

Hi, I am Sukhdeep. You can call me proto. I am new here.
PROTOTYPE-1 is offline   Reply With Quote
Old Yesterday, 08:06 AM   #19213
Ali2018
New Member
 
Join Date: May 2018
City & State: Baghdad
My Country: Iraq
I'm a: Knowledge Seeker
Posts: 4
Default Re: New Members - please post your introductions here

Hello........
Ali2018 is offline   Reply With Quote
Old Yesterday, 08:09 AM   #19214
Ali2018
New Member
 
Join Date: May 2018
City & State: Baghdad
My Country: Iraq
I'm a: Knowledge Seeker
Posts: 4
Default Re: New Members - please post your introductions here

I have hp 8570p elitebook , how can I do welding for internal speaker jack saftly, becuase it broken down accidently
Ali2018 is offline   Reply With Quote
Old Yesterday, 08:14 AM   #19215
Ali2018
New Member
 
Join Date: May 2018
City & State: Baghdad
My Country: Iraq
I'm a: Knowledge Seeker
Posts: 4
Default Re: New Members - please post your introductions here

I am specialist dentist , nem member , I am interesting in electronic repairing and maitainance
Ali2018 is offline   Reply With Quote
Old Yesterday, 10:10 AM   #19216
giorgio80
New Member
 
Join Date: Mar 2017
City & State: milano
My Country: italy
I'm a: Knowledge Seeker
Posts: 1
Default Re: New Members - please post your introductions here

Hello guys ,

Giorgio from Italy in search of help for repair a 55x9005c
giorgio80 is offline   Reply With Quote
Old Yesterday, 12:53 PM   #19217
fatmarley1972
New Member
 
Join Date: May 2018
City & State: Gloucestershire
My Country: England
I'm a: Knowledge Seeker
Posts: 2
Default Re: New Members - please post your introductions here

Hello everyone.

I'm interested in diy hifi but my tv has just packed up and I'm hoping to repair It.

Cheers
Matt
fatmarley1972 is offline   Reply With Quote
Old Yesterday, 03:57 PM   #19218
Velocet
New Member
 
Join Date: May 2018
City & State: Cologne
My Country: Germany
I'm a: Knowledge Seeker
Posts: 1
Default Re: New Members - please post your introductions here

Hello @ all

Just got a cheap flatscreen and found the problem was already fixed here.

Thanks everyone on this board and i will hope to also provide some information that will be helpful for someone.

Greetings,
Velocet
Velocet is offline   Reply With Quote
Old Yesterday, 06:39 PM   #19219
Mike-the-Re-Engineer
New Member
 
Join Date: May 2018
City & State: Bakersfield, CA
My Country: United States
I'm a: Knowledge Seeker
Posts: 1
Default Mike-The-Re-Engineer

I am an Appliance Re-Engineer. I started a Facebook group primarily for PCB repair, namely capacitor/relay, (and other electronic component) replacement, and troubleshooting, anything that will get a same day complete, so we don't have to send boards to be repaired or order parts. This saves the customer money and makes us more money at the same time. We also do mods for when there is a poor design by an appliance manufacturer, we make it better. Anyone is welcome to join, https://www.facebook.com/groups/1940521266213457/ . Glad to be here, hope to contribute and learn.
Mike-the-Re-Engineer is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums 2003 - 2018
Powered by vBulletin ®
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 01:31 AM.

Did you find this forum helpful?