The 3v/5v IC (2n5bto7) was getting hot when connected to PSU and I measured the resistance to the ground of every pin.
phase2 pin and vclk were shorted to the ground. to determine the direction of the short, I disconnected the coil which was connected to phase 2 and the short was not from the IC, but from the power rail.
I injected 1V to see what was getting warmer, about 500mA current draw was observed and The PCH side of the SoC is getting warmer.
I have 2 Questions for you guys,
Is the vlck low resistance to the ground normal?
It is safe to assume that the PCH is Done?
phase2 pin and vclk were shorted to the ground. to determine the direction of the short, I disconnected the coil which was connected to phase 2 and the short was not from the IC, but from the power rail.
I injected 1V to see what was getting warmer, about 500mA current draw was observed and The PCH side of the SoC is getting warmer.
I have 2 Questions for you guys,
Is the vlck low resistance to the ground normal?
It is safe to assume that the PCH is Done?
Comment