![]() |
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Member
Join Date: Jun 2019
City & State: Spring Hill Florida
My Country: USA
Line Voltage: 120VAC
I'm a: Knowledge Seeker
Posts: 34
|
![]() Hi
I recently acquired an LG55 UN6955ZUF When I cycle it on it has backlights and audio. No video just the light blue hue of the backlights. I’ve replaced the main board hoping it would take care of the problem but, same outcome. I’ve started taking some reading from the buffer strips on the panel itself but I’m not sure what the reading should be. Here’s the current readings LEFT SIDE BUFFER VCC33. 3.35 VDC CLK 70 ohms DI 130 ohms GND. gnd CS 3.27 VDC DO. open WP. OPEN RIGHT SIDE BUFFER VCC33. Open SCL. Open SDA open GND GND Has anyone had issues like this. The tv is only around 4 months old Thanks in advance |
![]() |
![]() |
![]() |
#2 |
Badcaps Veteran
Join Date: Apr 2010
Posts: 320
|
![]() Unplug the ribbons and see what you have in the picture.
|
![]() |
![]() |
![]() |
#3 |
Member
Join Date: Jun 2019
City & State: Spring Hill Florida
My Country: USA
Line Voltage: 120VAC
I'm a: Knowledge Seeker
Posts: 34
|
![]() Hi,
I have tried unplugging each side individually. Made no difference. Same result .No video Thanks |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|