Here is what I would like to do
I have a LED yard light that use about 360 milliamperes
I would like the LED yard light to run a minimum of 8 hours at full brightness
I going to use lipo 4 batteries that new / old stock which means that they do not have the maximum power output what they say they should be which probably inflated to being with
So how do calculate how many batteries do I need with out doing a bunch hit and miss trail error
The test I have done on these batteries so far is this
I charged them one at time
Put a 860 mill amp load on them until the protection board turn the load off
Which is about hour
I have a LED yard light that use about 360 milliamperes
I would like the LED yard light to run a minimum of 8 hours at full brightness
I going to use lipo 4 batteries that new / old stock which means that they do not have the maximum power output what they say they should be which probably inflated to being with
So how do calculate how many batteries do I need with out doing a bunch hit and miss trail error
The test I have done on these batteries so far is this
I charged them one at time
Put a 860 mill amp load on them until the protection board turn the load off
Which is about hour
Comment