well this come from another store , they told us they have replaced the entire top cover with keyboard , since the outher one was with the small board attached near the touchpad full of corrosion due to waterdamage , they order another one , and doest not turn on , we UC the board and seems with a good aspect , but now still not turn on ,
for what i've measured i only got one coils with 8.35 volts , in this case L7030 , on the Q7030 on the drain got 16 volts , on the source it drop to 8.35v .
trying to find out also were is the g3hot pin for i can make a direct jumper to see if it start.
i got the correct board view but the wrong schematic
for what i've measured i only got one coils with 8.35 volts , in this case L7030 , on the Q7030 on the drain got 16 volts , on the source it drop to 8.35v .
trying to find out also were is the g3hot pin for i can make a direct jumper to see if it start.
i got the correct board view but the wrong schematic
Comment