Badcaps.net Forum
Go Back   Badcaps Forums > Troubleshooting Hardware & Devices and Electronics Theory > Troubleshooting Printers, Copiers, Scanners and other Imaging & Printing Devices
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-14-2019, 10:37 AM   #21
R_J
Badcaps Veteran
 
Join Date: Jun 2012
City & State: ☻
My Country: Canada
I'm a: Professional Tech
Posts: 4,097
Default Re: Panasonic NVGS50 camcorder backlight issue

It must be that something else caused r1002 to go open, not the monitor circuit, what you could do is remove R1002 and see if the camera operates as before, If it does, then I suspect the problem is elsewere.
R1002 supplies the NOREG line (page74), that line also goes to (page78), IC2201 (cyl/cap loading motor drive)
This circuit with ic2201, could not have been working with R1002 open. I think this is what caused R1002 to go open and NOT the monitor circuit, the no backlight was just a result of the missing 8 volts, but the real cause could be with the mechanism overloading ic2201.
The NOREG line also supplies the lens drive (page 58)

The video drum (1 inch cylinder) should be free to spin, check that it is not stuck.

Last edited by R_J; 05-14-2019 at 11:10 AM..
R_J is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums 2003 - 2019
Powered by vBulletin ®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 01:35 AM.
Did you find this forum helpful?