Badcaps.net Forum
Go Back   Badcaps Forums > Troubleshooting Hardware & Devices and Electronics Theory > Troubleshooting & Designing Networks
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 02-01-2019, 03:25 PM   #1
Spork Schivago
Your Awesomeness
 
Join Date: Mar 2012
City & State: Corning, New York
My Country: United States of America
Line Voltage: 120VAC 60Hz
I'm a: Professional Tech
Posts: 4,616
Default Questions about VLANs and Cisco Hardware

Does anyone have any experience with Cisco hardware, specifically WLCs, Wireless APs, and VLANs?

I took the CCNA courses, but it was a very long time ago. We didn't go over wireless technologies in the course because back then, I believe wireless was fairly new in the business sector.

To start with, I'm having some trouble understanding VLANs. I realize on Cisco hardware at least that a VLAN ID is layer 2, a VLAN interface is layer 3. I am a bit confused with VLAN tagging though.

I have a setup like this:
Code:
Cisco Router
--------------
Interface GigabitEthernet 0/0/1 <-- access port, Public Static IPv4 address

Interface Wlan-GigabitEthernet0/1/8
 Description: Internal switch interface connecting to the embedded AP
 switchport trunk native vlan 999
 switchport trunk allowed vlan 10,20,40
 switchport mode trunk
end

VLAN ID 10
VLAN ID 20
VLAN ID 40

Interface VLAN 10 <-- Network Address 10.0.0.0 / 24, IP address 10.0.0.1
Interface VLAN 20 <-- Network Address 10.0.20.0 / 24, IP address 10.0.20.1
Interface VLAN 40 <-- Network Address 10.0.40.0 / 24, IP address 10.0.40.1

WLC
-----
Interface management <-- Untagged, IP address 10.0.0.2
Interface vlan_employees <-- Tagged VLAN 20, IP address 10.0.20.2
From the built-in WLC, I have trouble pinging the router. I read the management interface needs to be left untagged. But if it's left untagged, how does it work? The packet leaves the WLC, untagged, enters the WLan-GigabitEthernet 0/1/8 interface, and then gets tagged with VLAN 10? Or does the packet reach the GigabitEthernet 0/1/8 interface, sees that it doesn't belong to a VLAN, and the interface drop the packet?

My understanding about the native VLAN is if the packet coming into the interface is tagged with the same VLAN that is set as the native VLAN, the interface will remove the tag and forward the packet to it's destination, untagged. Is that correct?

Thanks!
__________________
-- Law of Expanding Memory: Applications Will Also Expand Until RAM Is Full
Spork Schivago is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums © 2003 - 2019
Powered by vBulletin ®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 04:35 PM.
Did you find this forum helpful?