Could someone help...?
50" Philips Plasma TVC
Philips S LC7 .2E PA (From inside: all boards are Samsung as well as the panel ..!)
Model N° 50PFP 5532D/12
220VAC/380w!!
Made in Hungary
Symptoms:
TV ON (i.e. led on front panel: blue): R 5600 & R5610 next to each other both burning (smoke/fume and oder...). NO BACKLIGHT---No litht on screen at all. Sound OK (with signal from a Demo for instance...).
These 2 Rs are located on lower extreme left side of Y-MAIN board.
Hope I could find the schematic, to find out the original fault as well as the values of these 2 1w-resistances. OR any other ideas/suggestions... By the way what are typical values of the volage(s) that excite(s) the plasma gas mixture... to produce light?
Note: TV is so heavy and embarrassing in troubleshooting!!
Note: No need for a picture of screen (nothing helpful to see).
50" Philips Plasma TVC
Philips S LC7 .2E PA (From inside: all boards are Samsung as well as the panel ..!)
Model N° 50PFP 5532D/12
220VAC/380w!!
Made in Hungary
Symptoms:
TV ON (i.e. led on front panel: blue): R 5600 & R5610 next to each other both burning (smoke/fume and oder...). NO BACKLIGHT---No litht on screen at all. Sound OK (with signal from a Demo for instance...).
These 2 Rs are located on lower extreme left side of Y-MAIN board.
Hope I could find the schematic, to find out the original fault as well as the values of these 2 1w-resistances. OR any other ideas/suggestions... By the way what are typical values of the volage(s) that excite(s) the plasma gas mixture... to produce light?
Note: TV is so heavy and embarrassing in troubleshooting!!
Note: No need for a picture of screen (nothing helpful to see).